For riding toeside, it helped me when i was taught to point your ass to the kite. That causes you to put a harder toe side edge

I need a new pump. Anyone know if the Core kite pump 2.0 adapter for the Core kites with "speed valve 2" can be used for a North 2014+ "NKB airport valve"?

My 2014 North Rebel pumps fine with the new valve just up to about 5 psi then the valve connector just pops out and I lose air. It seems just a little air leaks between the pump valve and the kite valve. It seems a better design would be a thing gasket so it locks tightly with friction.

Has anyone done the BST12 toggle switch mod in the last year or so? I'm not sure where to dremel. The board appears to be different.

I check the pump in no problem. Reading carry on baggage rules for a couple of airlines, as long as the batteries are stock (sealed lead acid) there should be no problem carrying it on, your results may vary.

Dan your a great help to the kiting community on and offline. Your non-biased perspective is informative and persuaded me to buy North for my first quiver. On my 2nd quiver, I had some issues too small to mention here but you pulled through with great customer service and prompt resolution of the pr...

Yesterday "Dan" the North rep and others were at North Demo Days in Belmont,CA and I spoke to them.

He said he believes the Juice will be released next week and will be available in 15m, 18m both with 3 struts and narrower LE.

Updated review please?

Solutions to the problems were addressed below: 1) wheel to lock up (I just simply installed a nylon lock nut to the left wheel) . 0dccfe70-e0af-4e37-9d95-80ff687643b4.png 2) The other rotation point (PVC pipe) was drilled on a drill press. I could not drill the two holes with perfect 90 degrees ori...

There was a problem with most every part of this version of the build. 1) as I pulled the cart forward, the left wheel's rotation, turned the washer, which in turn turned the nut which made it tighter. This caused the wheel to lock up stopping the cart. 2) The rotation point (PVC pipe) was not drill...