as you can see in pic 10/32 i made the board with 3 plywood (4mm) and one veneer (0.9mm). the tux is made from walnut and maple veneer which i cut with a knife (pic. 1-5) 6/32 and 8/32 here i make the form (pic. 11, 12) for the board (yes outline). on this form i put the 4 pieces with epoxy on it an...

@kik128
thanks.

http://www.proz.com/?eid_s=9171&float=y ... 1499&sp=mt

nussbaum = walnut

i don't have instructions in english, but what would you like to know exactly?

you can find a step by step slideshow here: http://pix.tux.ch/tuxboard8/

coolest design for a linux freak:


i don't know the wood-names in english. in german: ahorn & nussbaum

swiss homepage

http://cautionkites.ch

neuenburger- and bielersee and also lac de joux are very good for kitesurf. on the clubpage http://kitegenossen.ch you will find all information about the spots in switzerland.

enjoy the perfect weather and the wind on the coast!

tuxli

toby cool date for birthday. tuxli has his birthday, too.
congrats!!!

now i ride always with a knife, so in that worst case i can cut all the lines. but i agree that it's better with a second qr...
i'll place a second qr soon

thanks...

@louis
overall picture follows...

today we go to the neuenburgersee... jea!!!

have a look at kitesurfing-kiel. there's a description in german.
afaik you understand german
tuxli
ps: woodies? cool!!!

here are pix from my safety
comments are welcome

tuxli

<img src="http://tux.ch/pix/tuxsafety/DSCN1687.JPG" height="640"></img>

http://tux.ch/pix/tuxsafety/