Contact   Imprint   Advertising   Guidelines

X2 Bar and Depower Length question

forum for kitesurfers

User avatar
Frequent Poster
Posts: 341
Joined: Sun May 05, 2002 1:00 am
Kiting since: 0
Brand Affiliation: None

Postby » Sat Jul 06, 2002 10:28 am

The bars of X2 kites I currently have are pretty different in terms of the chicken loop line length (the line which has the yellow end piece on it and goes to the chicken loop).


The first I got has a long piece from the adjuster, so that you could untie the knot and make the depower length longer (length from chicken loop to the adjuster).

The two I got yesterday do NOT have a long piece at the end. The yellow end piece is directly at the adjuster and the depower length seems pretty short.

Could this be a problem or is the default depower lenght long enough? I'm used to AirBlasts depower lengths, so this could be why I think it could be too short.

What are your experiences?


Medium Poster
Posts: 67
Joined: Fri Dec 14, 2001 1:00 am

Postby TheRob » Sat Jul 06, 2002 6:15 pm

the yellow line should be 11 to 12 inches from the knot to the end of the bar.

Medium Poster
Posts: 143
Joined: Sat Dec 15, 2001 1:00 am

Postby phree » Mon Jul 08, 2002 5:13 am

Frequent Poster
Posts: 457
Joined: Tue May 28, 2002 1:00 am
Kiting since: 0
Brand Affiliation: None
Location: Munich, Germany

Postby jever98 » Mon Jul 08, 2002 9:05 am

from my experience with the X2, the depower length is long enough. It is very effective in its depower.
And for the Airblast: without the bridle, I found the depower to be too long. Either the back lines went slack, or the kite oversheeted too much.

Return to “Kitesurfing”

Who is online

Users browsing this forum: kitesurf taranto, Lokihel and 20 guests