Page 1 of 1

Posted: Tue Aug 27, 2002 12:10 pm
by Stace
Hi guys,

Just a quick question. Does anyone know if there were different batches made of the ARX for 2001 and 2002 (pre-X2 release). I seem to remember people talking about an updated version (maybe to combat the de-lamination) but I cannot remember.

If so, is there any obvious way of telling whether you have an earlier or later version?

Stace

Posted: Tue Aug 27, 2002 12:16 pm
by Dwight
The later ones had "X" pattern in the weave of the leading edge material. The early ones has a stripe pattern.

Posted: Tue Aug 27, 2002 12:31 pm
by Stace
That's great, thanks mate.

What was meant to have been done to the later ones?

Stace :eek:)

Posted: Tue Aug 27, 2002 1:02 pm
by BLOWN AWAY
Didn't the earlier ones have the same aspect ratio for all their kites (5.1 or 5.2) and the later ones have the different aspect ratios like the Airblasts...

RUST IN PEACE :smile:

Posted: Tue Aug 27, 2002 1:46 pm
by Fabe
Eeehhmmm,

does it make sense to call a kite AR!!X!! and make it an AR5,2???
Not to me. :wink:

Fabe

Posted: Tue Aug 27, 2002 2:16 pm
by Colona
Hi,

There was at least 3 in-line design changes on the ARX, one change was that the leading edge got narrower and the kites turned faster. Then there was the material changes relating to the mylar problem. The latest one does not have the mylar lamination on the outside at all and some even came with Polyfuse that was developed for the Aero.

Throughout last year you can also find small changes in the velcro attachment for the valve caps etc.

Thanks,

Bengan
http://www.colonawatersports.com

Posted: Tue Aug 27, 2002 2:58 pm
by Stace
Thanks very much guys. You've answered all my questions perfectly.

Stace :wink:

Posted: Tue Aug 27, 2002 3:28 pm
by murdoc
also, the third version (fall 01) hat two valves in the LE ...