Naish Shift system Depower throw

woodfu · **Joined:** Wed Sep 27, 2006 12:28 pm **Posts:** 289

Could someone tell me what the default shift system depower throw for 06 or 07 is supposed to be?

Had a look but cant find it here or on the naish site.

Cheers

woodfu · **Joined:** Wed Sep 27, 2006 12:28 pm **Posts:** 289

Bump, nobody?

JGTR · **Joined:** Sun Jun 19, 2005 10:28 pm **Posts:** 1148

For 07 bar

Quote:

length of c loop line is 32.5 cm, my geuss is that it is 32cm when it is tied a the factory but this one has been used so will have tightened,

measurement taken from the top of the c loop to the bottom of the knot where it ties onto the dewoper strap.

James

Naish UK

Jay

R Soul · **Posted:** Mon Oct 22, 2007 7:40 pm

Or alternately, all four lines the same length when bar is at max power.

The very first thing I do with a Shift bar is reduce the C/L length by about 2 inches... I like to ride against the knot when over-powered, and my arms aren't as long as Robby's!

Actually the shift is very customisable, tweak about with it, but make sure the front lines are never longer than the rear at max.

Naish Shift system Depower throw

Who is online