Forum for kitesurfers
-
KAWIKA
- Frequent Poster
- Posts: 298
- Joined: Mon Jan 30, 2006 2:25 am
- Brand Affiliation: Team rider for Switch don't get payed by Switch luv the kites & price
-
Has thanked:
0
-
Been thanked:
0
Postby KAWIKA » Sat Nov 12, 2011 5:08 am
Here's something to consider while everybody keeps shopping at west marine for kite parts for all there so called indestructible kites
Yes I do ride Switch kites love the top notch quality and performance of the kites but with all kites things wear out & break why not order the same part that you need at wholesale prices rather then making a new bridal line or making a bladder with stick on valves that really don't work that well. Instead you have a separate online warehousehttp://switchkites.com/warehou ... ucts_id=44 with each individual part for every size kite also every part for your bar to keep u save
I have not had any issues except replacing the center line on my bar which only cost $14.50 I kinda felt guilty because it was so inexspensive so I remembered I needed a pump only $11.50 so I ordered & it shipped to me in 5 days back when I had this issue before switch it would have cost me a hell of lot more $$ they even had a video on how to replace center line
-
TommyDuotone
- Very Frequent Poster
- Posts: 864
- Joined: Sun May 18, 2008 5:34 pm
- Favorite Beaches: IB, Rauls, 38's, Gavs
- Style: surf
- Gear: North, Ocean Rodeo, Firewire
- Location: Imperial Beach
-
Has thanked:
5 times
-
Been thanked:
9 times
Postby TommyDuotone » Sat Nov 12, 2011 5:22 am
The bridal line cost less than $5 for both pieces, nothing to make, and west marine is just down the street. So for me, I like when kite companies use standardized parts and don't have to order/wait for the over-priced parts to come. 14.50 is not bad, but still cheaper at west marine for that same line(I'm assuming it's the same as the North bar since they look pretty similar)
I did look on the switch website and the spare parts are very reasonable which is quite different from what I'm used to seeing. PROPS to Switch
Last edited by
TommyDuotone on Sat Nov 12, 2011 7:14 am, edited 1 time in total.
-
eldadgold
- Very Frequent Poster
- Posts: 1230
- Joined: Mon Oct 31, 2005 5:09 pm
- Brand Affiliation: None
- Location: israel
-
Has thanked:
0
-
Been thanked:
0
Postby eldadgold » Sat Nov 12, 2011 5:48 am
Guys, seriously, are all of you from the US?
No one mentioned Fone.
had Fones for 4 years now and hands down these kites are the most durable kites out there.
-
tautologies
- Very Frequent Poster
- Posts: 10865
- Joined: Mon Feb 16, 2004 5:36 am
- Brand Affiliation: None
- Location: Oahu
-
Has thanked:
100 times
-
Been thanked:
156 times
-
Contact:
Postby tautologies » Sat Nov 12, 2011 7:28 am
I think we can conclude there are a lot of well built kites out there. When that is said, people do have very different usage patterns.
-
TheJoe
- Very Frequent Poster
- Posts: 1738
- Joined: Fri Oct 30, 2009 9:13 pm
- Local Beach: Texas city levee, Galveston, El Jardine and Crystal beach.
- Style: Freeride, Foil, Surf, a lil freestyle
- Gear: North Reach 7,9,12
Brunotti TT
Moses 633/483
Dwarfcraft Micro
- Brand Affiliation: None
-
Has thanked:
9 times
-
Been thanked:
118 times
Postby TheJoe » Sat Nov 12, 2011 7:50 am
Really it is all about how and where you fly them. My main spot is a grass launch area in a huge bay. The biggest environmental threat to my gear is the sun and we have lots of that. Sand and high winds will eat gear alive. My 2yr old 9m has been sewn 4 times my 12m one patch on a pin hole had it the same amount of time. The 9 takes a harder beating since I fly it in higher winds and in the surf. Putting a kite through the washing machine wears them fast.
-
tautologies
- Very Frequent Poster
- Posts: 10865
- Joined: Mon Feb 16, 2004 5:36 am
- Brand Affiliation: None
- Location: Oahu
-
Has thanked:
100 times
-
Been thanked:
156 times
-
Contact:
Postby tautologies » Sat Nov 12, 2011 8:14 am
Funny story (I think) about my friend's 14 meter Naish Torch. He likes to ride powered, and will take that kite out in any wave more or less. Long story short, he drops it in the impact zone on a big wave, that completely muches the kite up...him and the kite are washed ashore (different places). He walk down the beach, to find this huge ball of lines, kite, and inflated bladder.
He is a big guy, so he carries / drags it up the beach as that ball to where we are, and just drops the kite. All of us thought it was a goner...when the kite hits the beach the kite just sort of unfolds and flop - plop the kite is still good all inflated, and just about ready to go (except the lines). All of us were kind of surprised considering the waves and how the kite looked getting dragged up the beach.
Moral of the story: Kites can take a surprising amount of beatings before they go.
-
RideLow
- Frequent Poster
- Posts: 387
- Joined: Fri Dec 23, 2005 1:30 am
- Gear: Wipika Free air! <3
- Brand Affiliation: Blue Waffle
- Location: In the search for wind
-
Has thanked:
1 time
-
Been thanked:
8 times
Postby RideLow » Sat Nov 12, 2011 9:27 am
eldadgold wrote:Guys, seriously, are all of you from the US?
No one mentioned Fone.
had Fones for 4 years now and hands down these kites are the most durable kites out there.
I had a Bandit 4 bar break on me when I was testing one. On the place where the leader lines are connected. Not to impressed with that.
Kite looked good tough and worked well.
-
Caesar
- Very Frequent Poster
- Posts: 1141
- Joined: Sat May 17, 2008 3:44 pm
- Local Beach: Cumbuco, Palm Cove, Port Douglas, Yorkeys Knob
- Gear: Not telling unless I'm getting paid.
- Brand Affiliation: Nothing...
- Location: DownUnder/Brazil cumbuco-oceanview.com
-
Has thanked:
7 times
-
Been thanked:
6 times
-
Contact:
Postby Caesar » Sat Nov 12, 2011 9:35 am
tautologies wrote:Moral of the story: Kites can take a surprising amount of beatings before they go.
Not so my 6 months old Cabrinha Switchblade which never went through "washing machines" and hard beatings.
Thanks everybody for your suggestions.
I guess all major kite brands were mentioned here in this thread.
What I was looking for is a durable kite with the same (or even better) jumping/height/hangtime characteristics as the SB.
I will give the Flysurfer Speed3 a go and see how this one performs. If no good, I will work through the others mentioned here.
Cheers
Caesar
-
E^Ri
- Medium Poster
- Posts: 85
- Joined: Tue Jun 17, 2008 11:05 pm
-
Has thanked:
0
-
Been thanked:
0
Postby E^Ri » Sat Nov 12, 2011 1:41 pm
HAHA I think every brand except Best has been mentioned which means either every brand is good or no one knows what they are talking about.
I don't think you will have much fun jumping foil kites. I haven't ridden one but I just can't imagine a non rigid frame accelerating as much when you send it. Anyone know where I can find a video of someone sending it big on a foil?
-
Starsky
- Very Frequent Poster
- Posts: 4373
- Joined: Mon Apr 19, 2004 12:12 pm
- Brand Affiliation: None
- Location: Ontario
-
Has thanked:
0
-
Been thanked:
3 times
Postby Starsky » Sat Nov 12, 2011 2:02 pm
some of them foils can go huge. They have their faults, but getting air aint one of em.
Return to “Kitesurfing”
Who is online
Users browsing this forum: Bartolo, BigBoyTonic, Bing [Bot], Breze, Google [Bot], Greenturtle, Kitemenn, nixmatters, Pepijn, tilmann, Ulrik, voodoospirit, wrogu and 172 guests