|
| Author |
Message |
|
knotwindy
|
Post subject: Re: The New V-7 Dynabar. Posted: Fri Apr 06, 2012 11:08 pm |
|
 |
| Frequent Poster |
Joined: Mon Sep 26, 2011 4:49 am Posts: 256
|
|
looks interesting, might have to give it a go. question though, if you are not into unhooked riding is there any reason you can not skip the "hook and pulley" piece and just hook the chicken lop through the bar or line. seems like this would give you a bit more throw with the bar for depower, you could not unhook by accident and you have to check your QR every time you go out or come in, which would seem to a safety plus as well as building muscle memory? or am i missing some obvious downside? other than the rope (but not the bar) maybe wearing faster? thanks to whoever has tried this for an answer.
|
|
| Top |
|
 |
|
robertovillate
|
Post subject: Re: The New V-7 Dynabar. Posted: Sat Apr 07, 2012 3:21 am |
|
 |
| Very Frequent Poster |
Joined: Wed Aug 14, 2002 1:00 am Posts: 1317 Location: PASA Level III Instructor FL- OBX - MI - the world
|
knotwindy wrote: looks interesting, might have to give it a go. question though, if you are not into unhooked riding is there any reason you can not skip the "hook and pulley" piece and just hook the chicken lop through the bar or line. seems like this would give you a bit more throw with the bar for depower, you could not unhook by accident and you have to check your QR every time you go out or come in, which would seem to a safety plus as well as building muscle memory? or am i missing some obvious downside? other than the rope (but not the bar) maybe wearing faster? thanks to whoever has tried this for an answer. You would wear thru the c-loop very quickly if you run the c-loop line directly against the rope - and it probably would not last more than a few sessions before your C-loop is destroyed, and the rope will wear quickly too. I would not recommend even trying this. There is a LOT of friction on the pin/roller when used with te metal slide. If you use the hook on the metal bar without a roller bushing you will even wear thru the marine grade stainless steel shackle pin. The rope mode does not wear on the plastic roller nearly as much. But you still want something covering the threaded pin, to protect both the pin and the rope. You can use a small stainelss ring on the rope and then run your c-loop thru that. Just make sure the ring is large enough diameter to allow easy release of the loop line. This will bring the bar a few inches closer to you if that is your goal.
|
|
| Top |
|
 |
|
Bille
|
Post subject: Re: The New V-7 Dynabar. Posted: Sat Apr 07, 2012 9:38 am |
|
 |
| Very Frequent Poster |
 |
Joined: Sun Sep 04, 2011 5:37 pm Posts: 975
|
turfAndsurf wrote: ... I'm curious to do some front and back rolls with the wave setup, anybody tried it? Any problems? I'm NO expert, with only 3 hours total time on the V-7 with the Cord set-up. And this isn't really a Problem so to say; but when doing my first several back-rolls i noticed that since the kite pulled from the side instead of the center like the fixed hook ; i was able to Carve the board Much deeper into roll and ended up with a LOT more energy than intended !! That's gonna be Great when i get the timing down, it will make the doubles a Bunch easier. Bille
|
|
| Top |
|
 |
|
tomatkins
|
Post subject: Re: The New V-7 Dynabar. Posted: Sun Apr 08, 2012 2:19 pm |
|
 |
| Very Frequent Poster |
Joined: Sat Jan 10, 2004 11:53 pm Posts: 794
|
knotwindy wrote: looks interesting, might have to give it a go. question though, if you are not into unhooked riding is there any reason you can not skip the "hook and pulley" piece and just hook the chicken lop through the bar or line. seems like this would give you a bit more throw with the bar for depower, you could not unhook by accident and you have to check your QR every time you go out or come in, which would seem to a safety plus as well as building muscle memory? or am i missing some obvious downside? other than the rope (but not the bar) maybe wearing faster? thanks to whoever has tried this for an answer. \ knotwindy wrote: looks interesting, might have to give it a go. question though, if you are not into unhooked riding is there any reason you can not skip the "hook and pulley" piece and just hook the chicken lop through the bar or line. seems like this would give you a bit more throw with the bar for depower, you could not unhook by accident and you have to check your QR every time you go out or come in, which would seem to a safety plus as well as building muscle memory? or am i missing some obvious downside? other than the rope (but not the bar) maybe wearing faster? thanks to whoever has tried this for an answer. You could do this with a Cabrinha to accomplish what you are asking about. I used this set-up, but have simplified it even more by substituting a single welded ring for the Marlin swivel. Just make sure the ring is just the right size for the mushroom release to work properly. It is too bad that the new 2012 mushroom release has been redisigned and won't work with a simple ring. If you rig up something, just make sure it works... or else just buy the dynabar. A number of kiters have been using the rope for many years... I have been one of them for the past 5 years, and have had no problems with rope wear, with any sliding hardware (rings, swivels, shackles) that I have put on the rope.
| Attachments: |

4.jpg [ 121.42 KIB | Viewed 692 times ]
|

2.jpg [ 117.81 KIB | Viewed 692 times ]
|
|
|
| Top |
|
 |
|
turfAndsurf
|
Post subject: Re: The New V-7 Dynabar. Posted: Wed Apr 11, 2012 6:25 pm |
|
 |
| Medium Poster |
Joined: Fri Dec 12, 2008 2:46 am Posts: 87 Location: San Diego
|
robertovillate wrote: turfAndsurf wrote: I also used it for the first time last week, didn't feel awkward at all, boosted some jumps, no problem. I'm curious to do some front and back rolls with the wave setup, anybody tried it? Any problems? no problemo. your hand(s) on the bar stabilize it (or can also help it slide). Just try it and you'll see for yourself. It actually helps to have the hook slide if you need to over-correct or twist your body more to stick a landing or transition landing (e.g. to toeside). Let us know what you think after you try it. Bille wrote: turfAndsurf wrote: ... I'm curious to do some front and back rolls with the wave setup, anybody tried it? Any problems? I'm NO expert, with only 3 hours total time on the V-7 with the Cord set-up. And this isn't really a Problem so to say; but when doing my first several back-rolls i noticed that since the kite pulled from the side instead of the center like the fixed hook ; i was able to Carve the board Much deeper into roll and ended up with a LOT more energy than intended !! That's gonna be Great when i get the timing down, it will make the doubles a Bunch easier. Bille As soon as I try it I will let you guys know, thanks for the info.
|
|
| Top |
|
 |
|
gbleck
|
Post subject: Re: The New V-7 Dynabar. Posted: Wed Apr 11, 2012 7:01 pm |
|
 |
| Very Frequent Poster |
Joined: Mon Oct 08, 2007 4:39 am Posts: 540
|
|
Have a V3 on my seat harness and love it. Will the V-7 fit the Dakine waist harness quick connects?
|
|
| Top |
|
 |
|
mowaves
|
Post subject: Re: The New V-7 Dynabar. Posted: Thu Apr 12, 2012 6:10 am |
|
 |
| Rare Poster |
Joined: Sun Apr 17, 2011 1:11 am Posts: 26
|
|
@tomatkins - I have just started experimenting with making a spectra rope bar similar to the setup you have. Seeing as you have the experience, I'm looking at what you have there and have a few questions. What's the gray tubing piece there for and what about the black stopper/adjuster and red ball? Thanks!
|
|
| Top |
|
 |
|
cabron
|
Post subject: Re: The New V-7 Dynabar. Posted: Thu Apr 12, 2012 11:48 am |
|
 |
| Frequent Poster |
Joined: Sun Feb 29, 2004 7:15 pm Posts: 301
|
this is a bit off topic from Dynabar, but anyways; Tomatkins etc. would this carabiner work just by itself, I mean if you put the rope through the eye (top left in the picture) of this thing:  Then the carabiner would slide freely through the rope and you wouldn't need other items like rings or shackles etc.? Would this work?
|
|
| Top |
|
 |
|
Telekiter
|
Post subject: Re: The New V-7 Dynabar. Posted: Thu Apr 12, 2012 12:51 pm |
|
 |
| Frequent Poster |
Joined: Thu Nov 10, 2005 10:37 pm Posts: 249 Location: Sweden
|
|
If you use a standard chickenloop with this carbiner everything would be waaaay out of reach unless you have monkey arms. I use the rope with a 50 mm stainless steel ring sliding in the rope and the quick release is like the cabrinha version connected directly to the ring, works flawlessly. Used the same rope the whole last season and stil not much sign on any wear. I will still change it for this season (like 1$) just to be safe.
/Urban.
|
|
| Top |
|
 |
|
mike dubs
|
Post subject: Re: The New V-7 Dynabar. Posted: Thu Apr 12, 2012 4:13 pm |
|
 |
| Frequent Poster |
Joined: Wed Aug 26, 2009 10:28 am Posts: 254
|
Look at Wichard they have great rings, shackles etc. As well as my Dynabar I also have a harness with a spreader bar that has the hook cut off, a dyneema line attached at each end and this shackle on the rope but snapped on the chicken loop. http://www.wichard.com/rubrique-Quick_r ... 00-ME.htmlThey have greaty breaking strain too. mike
|
|
| Top |
|
 |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|