Forum for kitesurfers
-
Hawaiis
- Very Frequent Poster
- Posts: 1375
- Joined: Wed Aug 24, 2011 11:39 am
- Local Beach: Kailua
- Brand Affiliation: None
-
Has thanked:
10 times
-
Been thanked:
2 times
Postby Hawaiis » Sun Mar 31, 2013 10:17 am
I used a drain cover and two toilet ring spacers to make this simple rotating strap.
-
Attachments
-
-
-
ronnie
- Very Frequent Poster
- Posts: 4192
- Joined: Sun Jul 24, 2005 6:39 pm
-
Has thanked:
31 times
-
Been thanked:
61 times
Postby ronnie » Sun Mar 31, 2013 11:37 am
Did you have to put new inserts into the board to be able to fit it?
-
tautologies
- Very Frequent Poster
- Posts: 10865
- Joined: Mon Feb 16, 2004 5:36 am
- Brand Affiliation: None
- Location: Oahu
-
Has thanked:
100 times
-
Been thanked:
156 times
-
Contact:
Postby tautologies » Sun Mar 31, 2013 11:55 am
How would rotating straps work on a raceboard? I am thinking how it might be better at releasing the foot when you tack.
-
ronnie
- Very Frequent Poster
- Posts: 4192
- Joined: Sun Jul 24, 2005 6:39 pm
-
Has thanked:
31 times
-
Been thanked:
61 times
Postby ronnie » Sun Mar 31, 2013 12:07 pm
tautologies wrote:How would rotating straps work on a raceboard? I am thinking how it might be better at releasing the foot when you tack.
I doubt it would work. They tend to suit a flat deck because the disc has to be flat to rotate. Most raceboards seem to be using ergonomic upper rails/foot domes now.
-
Hawaiis
- Very Frequent Poster
- Posts: 1375
- Joined: Wed Aug 24, 2011 11:39 am
- Local Beach: Kailua
- Brand Affiliation: None
-
Has thanked:
10 times
-
Been thanked:
2 times
Postby Hawaiis » Sun Mar 31, 2013 6:22 pm
This goes on a Rush Randle foil board, it had snowboard boots on.
I want to try strapless later. I put the deck pad on first.
Used the original 4cm spaced Quad holes(snowboard design).
The drain cover has hole that are exactly 4cm apart.
The toilet rings have the holes in placed too.
I put screw inserts into the toilet rings to hold the strap bolts.
The deck is very flat. I Don't think it will work on race boards with rounded rails.
-
ronnie
- Very Frequent Poster
- Posts: 4192
- Joined: Sun Jul 24, 2005 6:39 pm
-
Has thanked:
31 times
-
Been thanked:
61 times
Postby ronnie » Sun Mar 31, 2013 8:10 pm
Hawaiis wrote:This goes on a Rush Randle foil board, it had snowboard boots on.
I want to try strapless later. I put the deck pad on first.
Used the original 4cm spaced Quad holes(snowboard design).
The drain cover has hole that are exactly 4cm apart.
The toilet rings have the holes in placed too.
I put screw inserts into the toilet rings to hold the strap bolts.
The deck is very flat. I Don't think it will work on race boards with rounded rails.
That sounds like a pretty good match.
There is a rotating mounting for Snowboards, but it doesn't look like it would cope with sand - and its expensive compared to your system.
http://www.amazon.com/Twisted-Bindings- ... B007FHL5S2
-
tautologies
- Very Frequent Poster
- Posts: 10865
- Joined: Mon Feb 16, 2004 5:36 am
- Brand Affiliation: None
- Location: Oahu
-
Has thanked:
100 times
-
Been thanked:
156 times
-
Contact:
Postby tautologies » Sun Mar 31, 2013 8:21 pm
ronnie wrote:tautologies wrote:How would rotating straps work on a raceboard? I am thinking how it might be better at releasing the foot when you tack.
I doubt it would work. They tend to suit a flat deck because the disc has to be flat to rotate. Most raceboards seem to be using ergonomic upper rails/foot domes now.
Yeah you would obviously have to design the board for it.
You'd also be able to move more on the board.
I'm mostly thinking for the front straps.
-
dejavu
- Frequent Poster
- Posts: 406
- Joined: Sat Apr 18, 2009 9:06 pm
- Kiting since: 2009
- Local Beach: Any that have steady wind
- Favorite Beaches: Any
- Style: Freeride with the conditions on the day
- Gear: Cabrinha, Flysurfer, NP, Rip Curl, WFMG, Avro, Aquapak, Loksac, Gopro, Suunto, apple watch.
- Brand Affiliation: None
-
Has thanked:
47 times
-
Been thanked:
56 times
Postby dejavu » Sun Mar 31, 2013 10:10 pm
What was the main reason you did this? Was it to jibe better or just maneuverability on the deck.
-
Hawaiis
- Very Frequent Poster
- Posts: 1375
- Joined: Wed Aug 24, 2011 11:39 am
- Local Beach: Kailua
- Brand Affiliation: None
-
Has thanked:
10 times
-
Been thanked:
2 times
Postby Hawaiis » Mon Apr 01, 2013 12:19 am
The main reason is to go toe side on the Foil board.
Return to “Kitesurfing”