Forum for kitesurfers
-
ShaveTheWhales
- Very Frequent Poster
- Posts: 780
- Joined: Sun Oct 27, 2013 1:28 pm
- Kiting since: 2040
- Local Beach: West Straya Oz
- Style: Fun with friends :) and being helpful :)
- Gear: Lightwind, 11m Sonic 3, OR Flite, slingshot Dwarf craft foil board, Sab foil
Medium Wind, 12m OR Flite, 8 SouL, TT C6 board, Crazyfly Ltd, Shinn Monk, Wave board
Strong / Gnarly Wind, 8m SouL, 8m XR Core, C6 board
All with custom moded bars
- Brand Affiliation: Anything that jumps well & fun to fly. Brand Bitch to none :)
-
Has thanked:
17 times
-
Been thanked:
66 times
Postby ShaveTheWhales » Sat Nov 16, 2013 8:14 am
Yep definitely what ozzy says plus when its nuking/freezing/raining and your in a hurry to pack up or traveling and squashing everything to minimum size, the cover would be protect the canopy..
-
Tiago1973
- Very Frequent Poster
- Posts: 778
- Joined: Mon Jun 28, 2010 6:58 pm
- Local Beach: Portugal
- Style: Freeriding
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Tiago1973 » Sat Nov 16, 2013 9:28 am
if someone loses the cover will have the plastic rubbing the tissue. i would consider adding a patch to the canopy
and give a look on ZigZag post on the Switch Lab thread, some interesting stuff
-
Westozzy
- Very Frequent Poster
- Posts: 2918
- Joined: Sat Jun 30, 2012 11:25 am
- Local Beach: Mandurah
- Style: Freeride, wave
- Gear: Rebel, Vegas 2012
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
1 time
Postby Westozzy » Sat Nov 16, 2013 10:36 am
Good idea, but I have never lost one of those. Plastic cap, supply a replacement with another seal ozone do.
-
Séb
- Frequent Poster
- Posts: 449
- Joined: Tue Jul 20, 2010 5:57 pm
- Gear: Flysurfer, Core, Shinn, Moses, Horue
- Brand Affiliation: None
- Location: Quebec, Canada
-
Has thanked:
1 time
-
Been thanked:
5 times
-
Contact:
Postby Séb » Sat Nov 16, 2013 1:50 pm
Dimitri,
First I am glad if you are seriously looking for a Boston valve! If you use the model like on the previous pictures you need an adaptor that will screw on the valve to correctly inflate it. Otherwise the hose will not hold correctly. An adaptor like in this picture below :
But you can use a better valve that require no adaptor at all, the hose just connect directly to the valve and voila ! Works like a charm.
-
Kamikuza
- Very Frequent Poster
- Posts: 7057
- Joined: Fri Jan 09, 2009 4:49 am
- Local Beach: Sabae Beach
- Favorite Beaches: Ol' Stinky
- Gear: This, that, the other
-
Has thanked:
220 times
-
Been thanked:
193 times
Postby Kamikuza » Sat Nov 16, 2013 2:48 pm
Séb wrote:But you can use a better valve that require no adaptor at all, the hose just connect directly to the valve and voila ! Works like a charm.
My vote's for this one. I don't see any more downside to it than any other, but without the need for another adapter (Cab) or chance to pop out (Ozone).
-
Séb
- Frequent Poster
- Posts: 449
- Joined: Tue Jul 20, 2010 5:57 pm
- Gear: Flysurfer, Core, Shinn, Moses, Horue
- Brand Affiliation: None
- Location: Quebec, Canada
-
Has thanked:
1 time
-
Been thanked:
5 times
-
Contact:
Postby Séb » Sat Nov 16, 2013 2:57 pm
Oh and if you use someday this kind of large Boston valve, REMOVE the old deflate valve! You don't need it anymore once you have the large inflate/deflate valve. Just one valve do it all!
-
knotwindy
- Very Frequent Poster
- Posts: 2385
- Joined: Mon Sep 26, 2011 4:49 am
- Local Beach: baja, gorge
- Style: erratic to none
- Gear: yes, I use gear
- Brand Affiliation: None
-
Has thanked:
274 times
-
Been thanked:
319 times
Postby knotwindy » Sat Nov 16, 2013 4:26 pm
Kamikuza wrote:Séb wrote:But you can use a better valve that require no adaptor at all, the hose just connect directly to the valve and voila ! Works like a charm.
My vote's for this one. I don't see any more downside to it than any other, but without the need for another adapter (Cab) or chance to pop out (Ozone).
i vote for this one as well. been using it for a season and works great. and you can use any pump, no extra parts or problems. easy, fast, works...
-
Dimitri M
- Very Frequent Poster
- Posts: 4785
- Joined: Sun Nov 03, 2002 1:00 am
- Local Beach: I travel all over the world.
- Favorite Beaches: So many to list....
- Style: MY OWN STYLE :-)
- Gear: SCREAMER 7/9/12/14 for Free Style. Not to forget the SCREAMER 10 LTD for my one go kite.
SURF 8 & 12 for the waves. RENEGADE 6.5 and 9 for all around kiting. And some times I use my son's JUNIOR PRO 4 when it blows 45+ for the waves.
Just try the EPICKITES and you will see for yourself.
- Brand Affiliation: Owner of EPIC KITES
- Location: OUTER BANKS (NC) USA. Owner of EPICKITES
-
Has thanked:
0
-
Been thanked:
14 times
-
Contact:
Postby Dimitri M » Sat Nov 16, 2013 6:12 pm
Once again you guys are great for all the info you have been giving me. Thank you so much.
On the other hand Séb, the reason I am keeping only the old "Inflate" valves (see attached picture) is for 2 reasons.
1) In case you don't have a pump with you on the beach and some one else has a pump but with not the same nozzle. Believe me I have had this happen to me so many times.
2) I like pumping my kites rock solid, but by doing so you are increasing the chances of blowing your Leading Edge of your kite if the kite hits the water full power few times. So instead of having my LE blow out, I rather have my "Inflate or Deflate" valve open. And this is the reason why I don't put the safety elastic around one of the valves. So it can pop open if the impact is tremendous. If you have just the Big Valve system the pressure will explode the LE or the Big Valve in order to escape.
So if I decide to go with the BIG VAVLE system I will always have and extra old "inflate" valve on the side for these 2 reasons I gave you.
-
Attachments
-
-
-
ShaveTheWhales
- Very Frequent Poster
- Posts: 780
- Joined: Sun Oct 27, 2013 1:28 pm
- Kiting since: 2040
- Local Beach: West Straya Oz
- Style: Fun with friends :) and being helpful :)
- Gear: Lightwind, 11m Sonic 3, OR Flite, slingshot Dwarf craft foil board, Sab foil
Medium Wind, 12m OR Flite, 8 SouL, TT C6 board, Crazyfly Ltd, Shinn Monk, Wave board
Strong / Gnarly Wind, 8m SouL, 8m XR Core, C6 board
All with custom moded bars
- Brand Affiliation: Anything that jumps well & fun to fly. Brand Bitch to none :)
-
Has thanked:
17 times
-
Been thanked:
66 times
Postby ShaveTheWhales » Sat Nov 16, 2013 6:14 pm
Séb wrote:Dimitri,
But you can use a better valve that require no adaptor at all, the hose just connect directly to the valve and voila ! Works like a charm.
That would be the best one - universal and also removes 1 extra moving part that you dont need... less is more in this case
Also in the pic below, it has a lot of holes and stitching in one small area...
Wether or not you keep the other valve - move the strut inflate to the opposite side - to load spread the leading edge and centralize the new valve away from the zipper more... less being more strength in this case
-
Attachments
-
- Neoprene cover.jpg (119.74 KiB) Viewed 1241 times
-
Dimitri M
- Very Frequent Poster
- Posts: 4785
- Joined: Sun Nov 03, 2002 1:00 am
- Local Beach: I travel all over the world.
- Favorite Beaches: So many to list....
- Style: MY OWN STYLE :-)
- Gear: SCREAMER 7/9/12/14 for Free Style. Not to forget the SCREAMER 10 LTD for my one go kite.
SURF 8 & 12 for the waves. RENEGADE 6.5 and 9 for all around kiting. And some times I use my son's JUNIOR PRO 4 when it blows 45+ for the waves.
Just try the EPICKITES and you will see for yourself.
- Brand Affiliation: Owner of EPIC KITES
- Location: OUTER BANKS (NC) USA. Owner of EPICKITES
-
Has thanked:
0
-
Been thanked:
14 times
-
Contact:
Postby Dimitri M » Sat Nov 16, 2013 6:46 pm
Also in the pic below, it has a lot of holes and stitching in one small area...
Wether or not you keep the other valve - move the strut inflate to the opposite side - to load spread the leading edge and centralize the new valve away from the zipper more... less being more strength in this case
Great advice
ShaveTheWhales. Thank you.
Return to “Kitesurfing”
Who is online
Users browsing this forum: Baidu [Spider], bittersvolcom, Brent NKB, bshmng, evan, Google [Bot], Indulang, jaros, marinjo77, Peter_Frank, suisd12, universalflush, Yahoo [Bot], zloilyoha and 542 guests