Contact   Imprint   Advertising   Guidelines

Cabrinha fx 2018 - trimming setting on wingtip

forum for kitesurfers


shutupjoy
Rare Poster
Posts: 41
Joined: Tue May 09, 2017 6:05 am
Kiting since: 2016
Gear: North Evo 2016
Brand Affiliation: None

Re: Cabrinha fx 2018 - trimming setting on wingtip

Postby shutupjoy » Tue Sep 26, 2017 8:27 am

shutupjoy wrote:
Tue Sep 26, 2017 7:10 am
"Because of the higher barpressure, you cannot pull the bar just as fast as you could with low barpressure, because your musclestrength is a constant factor regardless of barpressure. And that translates to a slower turning kite in the end. "


You are going too far with the "high bar preassure", its not so hard to pull even if you a little girl. Its not make it rotate slower if the bar preassure is high.

Faxie
Very Frequent Poster
Posts: 582
Joined: Tue Jun 19, 2012 10:39 pm
Kiting since: 2011
Local Beach: Netherlands. Maasvlakte, Slufter, Scheveningen, Domburg, Rilland, Brouwersdam, Ouddorp, Binnenschelde, Vrouwenpolder, Oostvoorne, Rockanje, Grevelingen, Borssele.
Style: Freeride, freestyle, wave.
Gear: Switch Helium V1 18m Element V3 13m-7m V4 9m-5m Legacy V1 10m-14m Slingshot Fuel 2005
Switch MJComp V2 136x41.5 Firewire Hellrazor 6.1 timbertek Shinn Shinnster Nobile 555 125x38
Brand Affiliation: None

Re: Cabrinha fx 2018 - trimming setting on wingtip

Postby Faxie » Tue Sep 26, 2017 4:09 pm

shutupjoy wrote:
Tue Sep 26, 2017 7:10 am
Because of the higher barpressure, you cannot pull the bar just as fast as you could with low barpressure, because your musclestrength is a constant factor regardless of barpressure. And that translates to a slower turning kite in the end.

You are going too far with the "high bar preassure", its not so hard to pull even if you a little girl. Its not make it rotate slower if the bar preassure is high.
One the first page you told the opposite... :roll:

Consider this: what if the backline connection was all the way to the front of the kite, resulting in major barpressure but not a lot of throw needed for aoa change... do you think the kite would turn faster?

shutupjoy
Rare Poster
Posts: 41
Joined: Tue May 09, 2017 6:05 am
Kiting since: 2016
Gear: North Evo 2016
Brand Affiliation: None

Re: Cabrinha fx 2018 - trimming setting on wingtip

Postby shutupjoy » Tue Sep 26, 2017 6:53 pm

Its so simple! its written on all kites where is "fast turn" and where is the "slow turn".
Always the "fast turn" will come with low bar preassure.
Always the "slow turn" will come with high bar preassure.
Not me invented that. The kitesurf company did, and they printed it on the wing-tip.

Faxie
Very Frequent Poster
Posts: 582
Joined: Tue Jun 19, 2012 10:39 pm
Kiting since: 2011
Local Beach: Netherlands. Maasvlakte, Slufter, Scheveningen, Domburg, Rilland, Brouwersdam, Ouddorp, Binnenschelde, Vrouwenpolder, Oostvoorne, Rockanje, Grevelingen, Borssele.
Style: Freeride, freestyle, wave.
Gear: Switch Helium V1 18m Element V3 13m-7m V4 9m-5m Legacy V1 10m-14m Slingshot Fuel 2005
Switch MJComp V2 136x41.5 Firewire Hellrazor 6.1 timbertek Shinn Shinnster Nobile 555 125x38
Brand Affiliation: None

Re: Cabrinha fx 2018 - trimming setting on wingtip

Postby Faxie » Tue Sep 26, 2017 8:15 pm

shutupjoy wrote:
Tue Sep 26, 2017 6:53 pm
Its so simple! its written on all kites where is "fast turn" and where is the "slow turn".
Always the "fast turn" will come with low bar preassure.
Always the "slow turn" will come with high bar preassure.
Not me invented that. The kitesurf company did, and they printed it on the wing-tip.
Dude, that's exaclty what I'm saying the whole time. Low pressure/fast turn, high pressure/slow turn. :rollgrin:

I'm done here :jump:


Return to “Kitesurfing”

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], HaylingBilly, Xtream, Yahoo [Bot] and 26 guests

cron