Contact   Imprint   Advertising   Guidelines

Urethane rails?

here you can exchange your experience and datas about your home build boards


sijandy
Very Frequent Poster
Posts: 626
Joined: Mon Sep 03, 2012 12:36 pm
Kiting since: 2007
Style: freestyle
Gear: kites and boards
Brand Affiliation: None

Urethane rails?

Postby sijandy » Tue Feb 19, 2013 8:21 am

Iv'e been making boards for a while now and have always either wrapped the rails or used an eposy filler but i'd like to try the 'sandwhich' style with urethane rails. Having never worked with it before my knowledge is zero and seeing as there are so many different types/grades i'd thought i'd ask what people are using and what works best?

BWD
Very Frequent Poster
Posts: 2750
Joined: Thu Jun 05, 2003 3:37 am

Re: Urethane rails?

Postby BWD » Tue Feb 19, 2013 5:37 pm

Word on the street is hardness 80, cure time not too short, mix and pour like resin, scuff with coarse sandpaper before glassing, as I recall. Stick with epoxy myself, less bottles of goo to buy and keep track of....

criznach
Medium Poster
Posts: 170
Joined: Mon Nov 28, 2005 11:44 pm
Kiting since: 0
Brand Affiliation: None
Location: Great Falls, Montana, USA

Re: Urethane rails?

Postby criznach » Wed Feb 27, 2013 6:39 am

A friend and I have a season on some boards made with Polytek 15-6. Tinted and plain off-white. Seems to be holding up. It's a little brittle at first, but once it's fully cured it seems to dent rather than crack. Had no issues with epoxy sticking.

http://www.polytek.com/index.php?dispat ... ory_id=249

A few gotchas...
Sets super fast. 5-10 minutes is all you get.
Pour as temps are dropping - evening.
They sell a UV additive. Using it seems wise.
Sand any cross-grain on your core to prevent bubbles.


Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 7 guests