Here you can exchange your experience and datas about your home build boards
-
twosouls
- Rare Poster
- Posts: 5
- Joined: Sat May 24, 2003 2:28 am
- Brand Affiliation: None
- Location: Coffs Harbour, NSW Australia
-
Has thanked:
0
-
Been thanked:
0
Postby twosouls » Wed Jun 25, 2003 11:55 pm
Aloha Group..
I hope someone can help me out..
I have an underground 147 and a litewave 169...
I wanted to add 2 more fins to the heal side like the majority of the new boards coming out have..
Can you just drill the holes and add the fins, or do you have to seal the board first, redrill the holes and then place the fins?
Any advice would be greatly appreciated..
thanks and aloha
Gary S.
-
Vega
- Medium Poster
- Posts: 106
- Joined: Sun Feb 23, 2003 12:47 pm
-
Has thanked:
0
-
Been thanked:
0
Postby Vega » Thu Jun 26, 2003 1:59 pm
First U drill holes bigger than the one U need. U then fill these holes, and after curing U drill the holes needed.
This way, your board is sealed, strong and safe.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 74 guests
