Contact   Imprint   Advertising   Guidelines


here you can exchange your experience and datas about your home build boards



Postby Guest » Fri Apr 16, 2004 4:38 pm

I had some succses building boards just using 1/4 mahagony plywood exterior and laid up with 4oz. carbon top and bottom.stainless inserts rise on the deck no need to grind just add a spacer under the strap and it fits far as the fin plugs just drill straight through.rocker is minimal, i just cut grooves in the ends to flip it then filled it with epoxy and let it dry then grind it smooth then lay up the carbon an wrap it with a thin plastic sheet tight and let it paint needed since its just a test board, i let the carbon just show and so far no uv and easy to build that can withstand abuse,also has good flex....BoardBuilder from GUAM U.S.A. :thumb:

Rare Poster
Posts: 14
Joined: Wed Dec 24, 2003 12:14 am
Kiting since: 0
Brand Affiliation: None
Location: Belgium

Postby Guerilla » Fri Apr 16, 2004 6:59 pm

Can you post some pictures?

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 4 guests