Contact   Imprint   Advertising   Guidelines

ultimate glass/carbon/aramide/etc. setup

here you can exchange your experience and datas about your home build boards

Rare Poster
Posts: 1
Joined: Mon Oct 25, 2004 9:06 pm

ultimate glass/carbon/aramide/etc. setup

Postby ampeter » Mon Oct 25, 2004 9:18 pm

hi there, i'm building boards for a longer period of time now.

check for more details.
i want to get in something new and am thinking of ways to get the ultimate combination of material for a board.

the constructionmethod i want to use is the same as formica (abs sidewalls)

but instead of formica i want to use glass/carbon/aramide or something like this.

am very intersted in how to build specific flex patterns in a board, the board i'm going the build will have a lot flex(more to the tips)

which setup would be best? try to get a lot of snappy pop out of the board.

as light as possible and kiteloopproof.

let's find out!

User avatar
Very Frequent Poster
Posts: 8773
Joined: Tue Nov 05, 2002 1:00 am
Kiting since: 2000
Gear: 10 Nemi HP, 15m Flysurfer..
Brand Affiliation: none, formally BEST Marketing Director.

Postby sq225917 » Mon Oct 25, 2004 9:32 pm


Guam Bomb
Frequent Poster
Posts: 290
Joined: Tue Apr 09, 2002 1:00 am
Kiting since: 0
Brand Affiliation: None
Location: GUAM U.S.A.

Postby Guam Bomb » Tue Oct 26, 2004 3:00 am

I make my boards with just formica on the bottom with no ABS rails a really thin profile especially in the tips,flat bottom no carbon just extra glass in the mid section and glass on the tips. No boards have been broken so far :thumb: Guam Bomb

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 1 guest