Contact   Imprint   Advertising   Guidelines

Flip tips

here you can exchange your experience and datas about your home build boards

Medium Poster
Posts: 126
Joined: Wed Jan 07, 2004 5:03 am
Kiting since: 0
Brand Affiliation: None
Location: Huntington Beach

Flip tips

Postby Francis » Tue Nov 09, 2004 4:30 am

I made a fiberglass lightwind board 150cm long and 44 cm wide. There is no rocker except the tips are flipped up 1.5 cm for about 15 cm. The tips are fairly wide 38 cm with rounded corners.
The board works great in lightwinds. I can ride and stay upwind in 10mph using a 19.5M Contra kite. I weigh 165 lbs.
The problem I have is that the corner of the board has a tendancy to catch chopp and it is really easy to submerge the board in transitions.
I would like know if anyone has experience this and have any ideas on how to fix it.
One thought is to make the tips narrower to eliminate the part of the corner that digs in.
I can also increase the flip tip angle.
Another is to curl up the corners of the board (convex shape at the tips) to help the board slide over chop better. I noticed that since I ride this board fairly flat (in light winds), the board is always sliding so the corner of the board ends up being the front of the board.
Any input would be appreciated.

User avatar
Frequent Poster
Posts: 411
Joined: Mon Nov 11, 2002 1:00 am
Kiting since: 0
Brand Affiliation: None
Location: canada/ oman

Postby Elia » Thu Dec 02, 2004 7:15 am

it sounds like you didn't taper the tips enough. At 44 wide and a 19.5 kite at your weight you should be able to stay up wind in like 6 knts.


Postby Guest » Mon Jan 10, 2005 9:35 am

you might consider flowreleases too... altough it doesn't solve diving and catching...

Do you have squared tips or rounded? Rounded tips solved my problem...


Postby Guest » Tue Jan 11, 2005 3:14 pm

I think with with a more curvier tip outline and some nose rocker should help out from catching the edge :thumb:

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 1 guest