breather ?

[trozen]

which should be the best 2 use ?

[chassan]

The first board I made was using a layer of Peel Ply ( is called Econoply at fiberglasssupply.com) and a layer of breather, it didn't work well for me, so since then I'm using 2 layers of the Econoply and is working perfectly.
Here's the link http://fiberglasssupply.com/Product_Cat ... gging.html

[sailrtnow]

This is the release fabric I use, and it comes off every time. http://www.jamestowndistributors.com/es ... &BANNERID=
I just do my layup and put a sheet of release fabric and then a layer of breateher fabric then put it in the bag. If your release is sticking try using more breather fabric.

[crabman]

If you cant get a release film ,plastic bin liners are good .If you want to bleed resin through it put small holes in it.