Contact   Imprint   Advertising   Guidelines

Footstrap Inserts - How?

here you can exchange your experience and datas about your home build boards

Medium Poster
Posts: 60
Joined: Mon Nov 21, 2005 5:00 pm
Kiting since: 0
Brand Affiliation: None

Footstrap Inserts - How?

Postby hugoc » Fri May 19, 2006 4:14 pm

I've read that you route out a whole in the foam core and fill it with an epoxy/microballons filler mixture.

But, do you laninate and cure the entire board in a vacuum first prior to drilling the filler and putting in the inserts? If so, how are the inserts held in - epoxy?

Or, do the inserts get put in during the lamination process?

Any details you can provide would be great as this is my first board.


Medium Poster
Posts: 158
Joined: Mon Dec 05, 2005 4:44 pm

Postby crabman » Fri May 19, 2006 8:21 pm


PM me .I can tell you the best way . :thumb:

Very Frequent Poster
Posts: 586
Joined: Tue Aug 24, 2004 6:39 pm
Kiting since: 2003
Brand Affiliation: None
Location: Iowa

Postby gbgreen59 » Wed May 31, 2006 6:09 pm

Here is another source you may be interested in pursuing. Has pictures of many steps in building a board. The inserts are part of the sequence. ... 08-02.html

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 2 guests