Contact   Imprint   Advertising   Guidelines

My latest

Here you can exchange your experience and datas about your home build boards
User avatar
blowhard
Very Frequent Poster
Posts: 836
Joined: Tue Mar 07, 2006 4:33 pm
Brand Affiliation: None
Location: Florence Oregon
Has thanked: 0
Been thanked: 0

My latest

Postby blowhard » Mon Jul 17, 2006 8:37 pm

A gift for my pal the 25 yr. veteren wave ripper of Florence
Attachments
Wedding board 004.jpg
Wedding board 004.jpg (167.21 KiB) Viewed 2389 times
Wedding board 005.jpg
Wedding board 005.jpg (129.22 KiB) Viewed 2389 times

Halomon
Frequent Poster
Posts: 284
Joined: Mon Mar 27, 2006 12:57 am
Brand Affiliation: None
Location: Maui,Hawaii
Has thanked: 0
Been thanked: 0

Postby Halomon » Sat Aug 26, 2006 11:49 pm

Yo Blowhard, this board is a very innovative concept. Looks like a clean build. How does it ride backwards with that large fin in the front. Guess it was meant to ride toeside more often than backwards. I built a similar mutant type board with even smaller fins that ocasionally caught when riding it backwards. I've since given up on mutants and stick to assymeterical twintips as my chosen medium. But for riding waves, this board must charge. Bravo for the innovation!!!

User avatar
blowhard
Very Frequent Poster
Posts: 836
Joined: Tue Mar 07, 2006 4:33 pm
Brand Affiliation: None
Location: Florence Oregon
Has thanked: 0
Been thanked: 0

duude

Postby blowhard » Sun Aug 27, 2006 5:42 pm

you are so right,
make em long 5' , single 4.5" fin on the pinner end then it won't catch , It's all you need with a pintail,with the small bow on the way out it's very shippy , the big end never pearls on the way down the line ,tons of rocker 2" on the pinner and 1 3/4 on the big end ,be sure to put your feet in the middle of the mass ,,not the board ,buttloads of concave 1/2",and flat in the pinner end ,
Hurry, because I hear they are going into production from Doyle very soon
then everybody that rides waves and stays to windward will have one ,
my pals say that they have never been on a board that goes to windward so well ,I just do it to operate one size smaller kite ,
Hein, calls them Transverse Assymetricle Twintips ,
I never ride toeside and the fin never catches unless you go flat (I dislike both )
,John Ash
Attachments
ironing board.JPG
ironing board.JPG (148.09 KiB) Viewed 2236 times
s t.JPG
s t.JPG (162.3 KiB) Viewed 2236 times
saber tooth.JPG
saber tooth.JPG (126.52 KiB) Viewed 2237 times

Halomon
Frequent Poster
Posts: 284
Joined: Mon Mar 27, 2006 12:57 am
Brand Affiliation: None
Location: Maui,Hawaii
Has thanked: 0
Been thanked: 0

Postby Halomon » Sun Aug 27, 2006 9:07 pm

Howzit Blowhard; Really enjoy your innovative designs; just might try another mutant type in the future. Just finished my new assy. twintip today; minutes ago I put the pads, fins and straps on and it's eady to rock. Too bad we're into a light wind period as we speak, but maybe it's good to let the board cure for a while. I will post pictures of my whole home made quiver one of these days; to date 7 foam/glass boards of various lengths. First I have to figure out the whole digital camera thing. Ah, something new to learn. Well bro, good on ya; keep building and riding!!!


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 129 guests