All times are UTC + 1 hour

Post new topic Reply to topic
 [ 2 posts ] 
Author Message
 Post subject: MTB re-painting
PostPosted: Wed Nov 08, 2006 9:33 am 
Rare Poster

Joined: Tue Aug 08, 2006 5:33 pm
Posts: 1
Location: Rome -Italy
Hi guys,

I had to repaint my Scrub Quasar because it was getting really scratched.
I have removed the original painting and I found I like the wood like aspect it has now.
Here is the question: which is the best way to paint it in trasparent mode: epoxy resin or transparent painting or what else?

I would like to be sure that wood is proctected against humidity and that the painting will not break because of the board flexibility.

Any idea, suggestion?

Here there is a pic of the work-in-progress: http://www.foillia.it/public/forum/index.php?act=Attach&type=post&id=10277


 Post subject:
PostPosted: Sun Nov 12, 2006 9:31 pm 
Frequent Poster

Joined: Mon Mar 27, 2006 12:57 am
Posts: 284
Location: Maui,Hawaii
Hello Andrea; My advice about your resurfacing job is to go with fast drying, two part epoxy resin. If applied correctly it should leave a thick, flexible, clear and glossy skin on your board that will proctect it well. Ask around your local surfboard shops where you can pick some up. There are different types of epoxy; get the fast drying type used for surfboards; apply it correctly and you will be set. You can apply multiple coats by lightly sanding in between coats. Take care and ride safe!! Chow

Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 2 posts ] 

All times are UTC + 1 hour

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group