*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 14 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: A Lightwind "Porker" IS BORN.
PostPosted: Sat May 12, 2007 8:16 pm 
Offline
Medium Poster

Joined: Thu Nov 02, 2006 5:12 pm
Posts: 76
I am getting excited.

Just finished laying-out and the cutting of the outline and routing templates for my new light wind summer machine.

The rocker is going to be based on the rocker dimensions of my previous boards which have been brilliant in the light stuff and for fast and early planning.

The outline however is going to be all new for this year.

So the vital statistics are 137 x 43 with a 3 stage rocker profile.
Still not sure on the concave though, will have to have a beer and think about that one.

I am also thinking hard about what to skin it with, should I use my spare Karbon/Armid 200gm cloth? or maybe some nice shiny "Holographic" carbon cloth.

Ohh choices, choices, choices and more choices.

I will post pics once completed in a week or so.

Regards
XS.


Last edited by XSwind on Wed May 30, 2007 8:33 pm, edited 1 time in total.

{ SHARE_ON_FACEBOOK } { SHARE_ON_TWITTER } { SHARE_ON_ORKUT } { SHARE_ON_DIGG } { SHARE_ON_MYSPACE } { SHARE_ON_DELICIOUS }
Top
Profile
 Post subject:
PostPosted: Wed May 16, 2007 5:51 pm 
Offline
Medium Poster

Joined: Thu Nov 02, 2006 5:12 pm
Posts: 76
Update 1.

The core has been profiled and shaped with the inserts fitted.

Just fin blocks to cast then hopefully laminating the bottom tonight.



Image

Image


Top
Profile
 Post subject:
PostPosted: Wed May 16, 2007 5:54 pm 
Offline
Medium Poster

Joined: Thu Nov 02, 2006 5:12 pm
Posts: 76
Opps forgot to say still have not decided which to use carbon/kevlar or the Silver Holographic carbon.

Ohh choices, choices, choices and more choices.


Top
Profile
 Post subject:
PostPosted: Fri May 18, 2007 6:24 pm 
Offline
Medium Poster

Joined: Thu Nov 02, 2006 5:12 pm
Posts: 76
Well decided to use a normal carbon on the bottom and the Holo Graphic carbon on the top.

You just need to see this stuff, flat and in the sunlight to really appreciate the look.

Image


Top
Profile
 Post subject:
PostPosted: Fri May 18, 2007 6:36 pm 
Offline
Medium Poster

Joined: Thu Nov 02, 2006 5:12 pm
Posts: 76
The latest is the "Porker" is in the bag.

I am all finished laminating and bagging.

Tomorrow I have about an hour and a half work to do to finish it.

Locate and drill out the inserts and fin locators. I use a template for this and it makes it so easy and quick.

Then it's just a matter of removing the flashing and it's done.

Latest...

Image


Top
Profile
 Post subject:
PostPosted: Mon May 21, 2007 4:30 pm 
Offline
Very Frequent Poster
User avatar

Joined: Wed Jun 25, 2003 8:04 pm
Posts: 712
That's gorgeous! Show us how it comes out with the Holo Graphic carbon topside. :thumb:

j


Top
Profile
 Post subject:
PostPosted: Tue May 22, 2007 4:28 pm 
Offline
Medium Poster

Joined: Thu Nov 02, 2006 5:12 pm
Posts: 76
I have been really busy over the past few days and not had time to finish the board off.

I will hopefully try tp finish it in the next few days and post some finished pics by the end of the week.


Top
Profile
 Post subject:
PostPosted: Tue May 29, 2007 4:09 pm 
Offline
Medium Poster

Joined: Thu Nov 02, 2006 5:12 pm
Posts: 76
I finally got around to taking the flash off the Porker last night (after trying to get around to it for a week) and thought I would post some more in-progress photos.

Absolutly no polishing or sanding has been done so far, only a quick bash around the outline with an angle grinder.

Going to drill the fins and strap inserts in the next day or so and will post pics one she is completed.

You got to love our sport.



Image

Image

Image


Top
Profile
 Post subject:
PostPosted: Wed May 30, 2007 8:43 pm 
Offline
Medium Poster

Joined: Thu Nov 02, 2006 5:12 pm
Posts: 76
Well

The Porker is finally finished and I am fairly pleased wityh the results.

So here she is in all her glory and in the twilight of a UK day...

Core lay-up...
Corecell 12mm thinning to 4mm tips
Rails are cast PU, 4mm thick.

Lamination lay-up from the top down...

Glass
Carbon
Glass
Glass
---CORE---
Glass
Carbon
Durasurf

Pics.....

Image

Image

Image

Image
[/img]


Top
Profile
 Post subject:
PostPosted: Sat Jun 02, 2007 12:02 am 
Offline
Very Frequent Poster
User avatar

Joined: Wed Nov 03, 2004 11:15 pm
Posts: 515
Location: Bergen County & LBI NJ
XSwind,

Very nice looking board, in fact its awesome... How does it ride?
Did you put concave in it?
What does it weigh in LBS?

X


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 14 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group