Here you can exchange your experience and datas about your home build boards
-
Mike W
- Rare Poster
- Posts: 37
- Joined: Fri Feb 21, 2003 10:02 pm
-
Has thanked:
0
-
Been thanked:
0
Postby Mike W » Fri May 25, 2007 5:25 pm
2 pieces of 1/4" birch glued. Fancy pattern with the 3M tape. It rides like a dream. 51"x21".
-
Attachments
-
- ply1.jpg (135.63 KiB) Viewed 2152 times
-
- ply2.jpg (110.81 KiB) Viewed 2151 times
-
Spinal
- Rare Poster
- Posts: 16
- Joined: Wed May 24, 2006 1:55 am
- Brand Affiliation: None
- Location: Vermont, USA
-
Has thanked:
0
-
Been thanked:
0
Postby Spinal » Sat May 26, 2007 6:27 pm
Nice board. Hoping to build one myself. What did you coat it with?
-
Mike W
- Rare Poster
- Posts: 37
- Joined: Fri Feb 21, 2003 10:02 pm
-
Has thanked:
0
-
Been thanked:
0
Postby Mike W » Mon May 28, 2007 2:04 am
I used spar varnish, which can be acquired at any home improvement center. Seems to hold up to H20 better than the standard stuff.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 267 guests
