Contact   Imprint   Advertising   Guidelines

fin placement ?

here you can exchange your experience and datas about your home build boards

Medium Poster
Posts: 70
Joined: Sun Jul 30, 2006 6:43 pm
Kiting since: 0
Brand Affiliation: None
Location: salt spring is. b.c. canada

fin placement ?

Postby kiteguy » Thu Jun 12, 2008 3:30 am

where do you put the fins on a board? measurments from side and ends? my ply board is 135 x 47 twin tip.any help would be great. thanks

Kevin Salter
Very Frequent Poster
Posts: 698
Joined: Thu Aug 17, 2006 9:44 pm
Kiting since: 2003
Style: Wave
Gear: 09 Eclipse Kima's, Surfboard
Brand Affiliation: None ride what I like
Location: Taranaki New Zealand

Re: fin placement ?

Postby Kevin Salter » Thu Jun 12, 2008 4:06 am

If you have your fins already then place them on the board to see what looks right.

The plan shape of your board determines the fin placement. More rounded corners and the fins will end up back and in from ,square tipped boards.

If the fin end is about 5cm back from the end of the board it helps stop most of the spray in the face.

Use a flexi battern to mark a straight line even at either end of the board from the centre line to get your fins in line.

On ply using two bolts per fin works well, and place the fins in a place that the bolts aren't too close to the edge of the board.

Very Frequent Poster
Posts: 975
Joined: Wed Nov 20, 2002 1:00 am
Kiting since: 0
Brand Affiliation: None
Location: rhode island

Re: fin placement ?

Postby zfennell » Tue Nov 18, 2008 2:26 pm

on the bottom always works for me.


Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 4 guests