Contact   Imprint   Advertising   Guidelines

How İs The Layers On Rocker Table ????

here you can exchange your experience and datas about your home build boards

Very Frequent Poster
Posts: 3403
Joined: Thu Jun 05, 2003 3:37 am

Re: How Ä°s The Layers On Rocker Table ????

Postby BWD » Thu Dec 18, 2008 5:59 am

if it comes out as nice as the renderings it will be nicer than mine!

Very Frequent Poster
Posts: 3416
Joined: Tue May 24, 2005 3:38 am
Kiting since: 0
Brand Affiliation: None
Location: Malibu

Re: How Ä°s The Layers On Rocker Table ????

Postby FredBGG » Tue Dec 23, 2008 7:06 am

If you are going to get into some serious board making I recomend that you
put together an adjustable rocker table.

I am making one with a stong wood base and then having the actual rocker plane
supported by a series of long threaded bolts so that it can be adjusted.

I am also putting a central adjustable support along the center line of the rocker plane so that
I can introduce a concave if I want to.



PS I'll post some photos when I'm done.....especially if it works nicely.

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 3 guests