Contact   Imprint   Advertising   Guidelines

Treating ABS so it will bond to Epoxy resin.

here you can exchange your experience and datas about your home build boards


FredBGG
Very Frequent Poster
Posts: 3402
Joined: Tue May 24, 2005 3:38 am
Kiting since: 0
Brand Affiliation: None
Location: Malibu

Re: Treating ABS so it will bond to Epoxy resin.

Postby FredBGG » Wed Mar 18, 2009 5:15 am

Ideally you should cut them out of one piece.

You can make it out of more than one piece, but the joint between them must be precise
and tight or you will have a weak spot.

You don't need the rails to be very wide to be effective.

About 1/2 an inch is enough.

cjh12371
Rare Poster
Posts: 11
Joined: Thu Aug 14, 2008 8:29 pm
Kiting since: 2001
Gear: Best, Slingshot, Liquid Force
Brand Affiliation: None

Re: Treating ABS so it will bond to Epoxy resin.

Postby cjh12371 » Thu Apr 09, 2009 7:47 pm

What thickness do you guys use, I can buy a 4x8' sheet here in town, but I don't know whether to buy 1/4", 3/16", 1/8" or something different?


Return to “Board Builders”

Who is online

Users browsing this forum: MSNbot Media and 4 guests