Contact   Imprint   Advertising   Guidelines

A legend in the making

here you can exchange your experience and datas about your home build boards


aeberl
Very Frequent Poster
Posts: 652
Joined: Tue Nov 22, 2005 10:57 pm

A legend in the making

Postby aeberl » Sat Mar 14, 2009 2:52 am

As I lost my latest creation, a directional quad, I have sterted this project:
It's sort of a bi-directional directional...
Attachments
DSC02114.JPG
Fin reinforcement poured and waiting to cure, insert cavities routed
DSC02114.JPG (47.86 KiB) Viewed 1997 times
DSC02113.JPG
Bottom sanded clean and fin reinforcement routed
DSC02113.JPG (28.77 KiB) Viewed 1997 times
DSC02110.JPG
Excess resin being sanded off
DSC02110.JPG (32.21 KiB) Viewed 1996 times
DSC02110.JPG
Outline routed (1/4"), filled with chopped glass fiber and epoxy, bottom laminate of core = 5mm long grain balsa except at tips. 5mm crossgrain balsa at tips.
DSC02110.JPG (32.21 KiB) Viewed 1996 times
DSC01943.JPG
Core is laminated blasa, top = 8mm long grain + 3 x hardwood stringers
DSC01943.JPG (43.56 KiB) Viewed 1996 times

schmoe
Very Frequent Poster
Posts: 1026
Joined: Fri Jul 08, 2005 3:42 am

Re: A legend in the making

Postby schmoe » Tue Mar 17, 2009 9:57 am

Nice work. Are you going to put some rocker or concave in it?

aeberl
Very Frequent Poster
Posts: 652
Joined: Tue Nov 22, 2005 10:57 pm

Re: A legend in the making

Postby aeberl » Wed Mar 18, 2009 6:46 pm

Allredy being done, 10mm concave, 25mm tail rocker, 70mm nose rocker. Pictues following shortly


Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 4 guests