Here you can exchange your experience and datas about your home build boards
-
aeberl
- Very Frequent Poster
- Posts: 659
- Joined: Tue Nov 22, 2005 10:57 pm
-
Has thanked:
0
-
Been thanked:
1 time
Postby aeberl » Sat Mar 14, 2009 2:52 am
As I lost my latest creation, a directional quad, I have sterted this project:
It's sort of a bi-directional directional...
-
Attachments
-
- Fin reinforcement poured and waiting to cure, insert cavities routed
- DSC02114.JPG (47.86 KiB) Viewed 2262 times
-
- Bottom sanded clean and fin reinforcement routed
- DSC02113.JPG (28.77 KiB) Viewed 2262 times
-
- Excess resin being sanded off
- DSC02110.JPG (32.21 KiB) Viewed 2261 times
-
- Outline routed (1/4"), filled with chopped glass fiber and epoxy, bottom laminate of core = 5mm long grain balsa except at tips. 5mm crossgrain balsa at tips.
- DSC02110.JPG (32.21 KiB) Viewed 2261 times
-
- Core is laminated blasa, top = 8mm long grain + 3 x hardwood stringers
- DSC01943.JPG (43.56 KiB) Viewed 2261 times
-
schmoe
- Very Frequent Poster
- Posts: 1026
- Joined: Fri Jul 08, 2005 3:42 am
-
Has thanked:
0
-
Been thanked:
0
Postby schmoe » Tue Mar 17, 2009 9:57 am
Nice work. Are you going to put some rocker or concave in it?
-
aeberl
- Very Frequent Poster
- Posts: 659
- Joined: Tue Nov 22, 2005 10:57 pm
-
Has thanked:
0
-
Been thanked:
1 time
Postby aeberl » Wed Mar 18, 2009 6:46 pm
Allredy being done, 10mm concave, 25mm tail rocker, 70mm nose rocker. Pictues following shortly
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 138 guests