Contact   Imprint   Advertising   Guidelines

Building a plywood kiteboard

here you can exchange your experience and datas about your home build boards


yoyoflavored
Rare Poster
Posts: 5
Joined: Fri Aug 14, 2009 3:11 am
Kiting since: 1
Local Beach: dont kiteboard yet
Favorite Beaches: look at above
Style: read that^
Gear: looking at liquid force
Brand Affiliation: liquid force and best kiteboarding

Building a plywood kiteboard

Postby yoyoflavored » Sun Aug 16, 2009 5:59 am

I am gonna attempt to build a kiteboard, but i would like to know a few things first...
1. I like flex in boarding sports. what type of plywood is strong and flexible???
2. How thick should it be???
3. any cool designs you ppl can email me to print on to the board???
if u need my weight just message or email me i usauly reply pretty fast

BWD
Very Frequent Poster
Posts: 2754
Joined: Thu Jun 05, 2003 3:37 am

Re: Building a plywood kiteboard

Postby BWD » Sun Aug 16, 2009 7:31 am

Building a ply kite board is fun and sort of cheap but to do it right you still probably spend some money.
You can make a 3kg one that's ok but not very poppy.
or a heavy heavy one that is stiff.
You need plywood with very thin plies and no knots, either birch, marine ply or aircraft ply.
Lots of info on the net and this site. keep looking.
1/2 inch or 12mm thick is enough.
If you glue it up from 2 or 3 thinner layers it is easier to put rocker in it.
It is something for fun, more than saving money.
You could take weeks to make it and spend $200 easy unless you already have tools, etc.
Or you could buy a good used board tomorrow for a similar amount of money.
Whatever,
good luck,
search the forum, plenty info here.

BTW graphics are retarded,.don't bother.

User avatar
discojuggernaut
Frequent Poster
Posts: 267
Joined: Sun Feb 24, 2008 11:37 pm
Kiting since: 2005
Local Beach: Long Beach - Sunset Cooridor
Favorite Beaches: SPI, Egypt, Waddell Creek, La Ventana, Hood River
Style: Freeride, big air, waveriding
Gear: 8m, 10m, 12m FS speed
Brand Affiliation: None
Location: Laguna Beach, CA

Re: Building a plywood kiteboard

Postby discojuggernaut » Sun Aug 16, 2009 9:05 pm

baltic birch


Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 5 guests