here you can exchange your experience and datas about your home build boards
- Rare Poster
- Posts: 5
- Joined: Fri Aug 14, 2009 3:11 am
- Kiting since: 1
- Local Beach: dont kiteboard yet
- Favorite Beaches: look at above
- Style: read that^
- Gear: looking at liquid force
- Brand Affiliation: liquid force and best kiteboarding
I am gonna attempt to build a kiteboard, but i would like to know a few things first...
1. I like flex in boarding sports. what type of plywood is strong and flexible???
2. How thick should it be???
3. any cool designs you ppl can email me to print on to the board???
if u need my weight just message or email me i usauly reply pretty fast
- Very Frequent Poster
- Posts: 3206
- Joined: Thu Jun 05, 2003 3:37 am
Building a ply kite board is fun and sort of cheap but to do it right you still probably spend some money.
You can make a 3kg one that's ok but not very poppy.
or a heavy heavy one that is stiff.
You need plywood with very thin plies and no knots, either birch, marine ply or aircraft ply.
Lots of info on the net and this site. keep looking.
1/2 inch or 12mm thick is enough.
If you glue it up from 2 or 3 thinner layers it is easier to put rocker in it.
It is something for fun, more than saving money.
You could take weeks to make it and spend $200 easy unless you already have tools, etc.
Or you could buy a good used board tomorrow for a similar amount of money.
search the forum, plenty info here.
BTW graphics are retarded,.don't bother.
- Frequent Poster
- Posts: 268
- Joined: Sun Feb 24, 2008 11:37 pm
- Kiting since: 2005
- Local Beach: Long Beach - Sunset Cooridor
- Favorite Beaches: SPI, Egypt, Waddell Creek, La Ventana, Hood River
- Style: Freeride, big air, waveriding
- Gear: 8m, 10m, 12m FS speed
- Brand Affiliation: None
- Location: Laguna Beach, CA
Return to “Board Builders”
Who is online
Users browsing this forum: No registered users and 1 guest