Contact   Imprint   Advertising   Guidelines

Course racer rockerline

here you can exchange your experience and datas about your home build boards

Rare Poster
Posts: 1
Joined: Tue Jun 15, 2010 2:54 pm
Kiting since: 0
Brand Affiliation: None

Course racer rockerline

Postby jonaseriksson » Tue Jun 15, 2010 3:36 pm

Hi, I am thinking of building a courseracer but have not found any info on the rockerline, dose anybody have any info/pics on a rockerline for this kind of board?


Rare Poster
Posts: 37
Joined: Wed Jul 28, 2010 1:29 am
Kiting since: 2000
Local Beach: mission beach san diego
Favorite Beaches: San Quintin Baja Mexico
Style: freeride
Gear: Wainman kites Best Kahona kites and my boards
Brand Affiliation: None

Re: Course racer rockerline

Postby laroyboards » Wed Jul 28, 2010 10:46 pm

If u are going to race the board rear rocker should be 0 to one half inch and about 2 inches on the nose however the future in these boards are for freeride in which case u need one half to 1 inch rear rocker same in the nose and a little concave in the center for a more user friendly ride however the difference between the two boards really is also about the fins

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 4 guests