Here you can exchange your experience and datas about your home build boards
-
gatecrasher
- Medium Poster
- Posts: 75
- Joined: Mon Jul 11, 2005 9:51 pm
- Local Beach: Panaga - Brunei
- Style: wave riding - free riding - foiling
- Gear: RRD Religion 10.5 and 9
RRD addiction 13
Ozone Chrono 12
F-One Bandit 8 and 6
- Brand Affiliation: None
- Location: Brunei
-
Has thanked:
0
-
Been thanked:
0
Postby gatecrasher » Tue Feb 09, 2010 11:27 am
I've got a very nice Resin8 6.1 swallow tail and also a 5.8 F-ONE with straps also detachable as the board as a very nice deck. But I would like to travel light when going on holiday and I was wondering if its such a good idea to get the local shaper to fix some straps inserts just in case it gets a bit too heavy duty for me.
Thanks all for the input
-
laroyboards
- Rare Poster
- Posts: 37
- Joined: Wed Jul 28, 2010 1:29 am
- Local Beach: mission beach san diego
- Favorite Beaches: San Quintin Baja Mexico
- Style: freeride
- Gear: Wainman kites Best Kahona kites and my boards
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby laroyboards » Thu Jul 29, 2010 12:13 am
You dont need a shaper to put them in u can do it yourself it is not that hard u just have to know how to do it u need a three quarter inch spade bit one quarter inch T nuts and a little epoxy drill a hole set the T nuts in and fill with epoxy dont forget to fill the T nuts with a screw or take it to a shaper
Return to “Gear Builders”
Who is online
Users browsing this forum: Wainando and 103 guests