Contact   Imprint   Advertising   Guidelines

plywood board epoxy or varnish?

here you can exchange your experience and datas about your home build boards

Medium Poster
Posts: 70
Joined: Sun Jul 30, 2006 6:43 pm
Kiting since: 0
Brand Affiliation: None
Location: salt spring is. b.c. canada

plywood board epoxy or varnish?

Postby kiteguy » Wed Aug 04, 2010 2:01 am

i built a baltic birch 1/2 " ply board in the shape of a spleen door a few years back but never seal it. I want to kite it this summer,what should i seal it with? i don't want it to weigh a ton so varnish or epoxy? and how many coats?

User avatar
Frequent Poster
Posts: 454
Joined: Tue Feb 24, 2009 1:43 pm
Kiting since: 2006
Local Beach: Grado Pineta (IT), Fossalon (IT)
Style: Freeride, strapless hooked-in
Gear: FS S3 19m2 DLX, S3 CE 12m2 DLX & S4 8m2 DLX
Homemade Surf & Snow Boards
MBS Pro90
Location: Iv.G.-Slovenia

Re: plywood board epoxy or varnish?

Postby zob » Wed Aug 04, 2010 7:27 am

If you don't have anything at home yet and you have to buy one or the other, I would suggest a boat varnish. Usually it is Polyacrillic with additives to withstand all weather conditions and with UV blockers to last longer in the sun. I use yacht varnishyou can see on top of this page.
It is very hard to sand, but that's the whole idea, if you really want to protect it.

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 3 guests