Contact   Imprint   Advertising   Guidelines


here you can exchange your experience and datas about your home build boards

Medium Poster
Posts: 96
Joined: Thu Mar 15, 2012 7:32 pm
Kiting since: 2009
Style: Freeride/Freestyle
Brand Affiliation: None


Postby Danydan » Sat Apr 07, 2012 4:14 pm

Hello everyone,
I was thinking of building a surfkiteboard for lightwind conditions... It seems that not a whole lot of you guys are building surfboard type of boards but for light wind, I think that it is one the best option to use as there is not a whole lot of jumping, more cruising and even though I never tried one with my kites, it looks like a comfortable style of riding (always on a light wind kind of perspective)... I will use boardCAD for dimensions and try to replicate it manually, meaning I don't have all the sophisticated tools to make it the exact dimensions. I guess I will have to use my sixth sense!!! Also, having no board construction experiences, I am planning of doing some tests of shaping and glassing on piece of scrap styrofoam as I will not be happy to make a big mistake on my first shaped board.

I watched a small video of how to do a skimboard and thought it might be a good idea to use the same kind of method for a surfkiteboard... You can watch it here the video called ''Home made Skimboard, making a foam blank(PART1 OF 3)'':

My question is then do I really have to make the center of the board with wood or just styrofoam (like the one for insulation a home depot) will be strong enough. It seems that the rocker could be easier to do with a piece of wood in the middle but at the same time if it's not necessary to add some strengh to the foam, I don't think I would bother doing it... I guess that a big piece of styrofoam would be harder to shape but might me stronger than cuting it in the middle on the whole lenght!!!

My other reference for my project will be the book that can be found on of (there is also some videos on youtube) even though I am planning to use lower quality material (in particular for the core; insulation foam).

Any comments or suggestion would be appreciated.

Thanks for your help guys.

User avatar
Very Frequent Poster
Posts: 568
Joined: Mon Jul 26, 2004 6:50 pm
Kiting since: 1999
Local Beach: Wolfe Island
Style: Old and grey surfer dude style
Gear: Core xr5 and windego boards
Brand Affiliation: None
Location: Wolfe Island Canada

Re: Kitesurfboard

Postby Bigdog » Sat Apr 07, 2012 4:46 pm

This method works really well. Without a stringer is fine but you need a rocker table to keep if from warping under vacuum. If you google Greg loehr there are several videos which will help.

Good luck.

User avatar
Frequent Poster
Posts: 435
Joined: Tue Jan 02, 2007 11:50 pm
Kiting since: 2000
Gear: DIY boards and OR kites
Brand Affiliation: None
Location: Ottawa, Canada

Re: Kitesurfboard

Postby foam-n-fibre » Wed Apr 11, 2012 1:52 am

If you do use the construction (extruded) foam, check to see if they have more than one compression strength. Often they can be found in 20 psi and 30 psi weights. Get the heavier stronger stuff. Whether you need a stringer for board strength depends on how thick it is too. Also, as has been said before, that foam does have issues with delam sometimes (but not always). Don't sand it super smooth, leave it a touch rough to get a good mechanical bond, and don't cook it in the car.


Medium Poster
Posts: 99
Joined: Thu Apr 10, 2008 3:49 pm
Kiting since: 0
Gear: wave
Brand Affiliation:

Re: Kitesurfboard

Postby handy » Wed Apr 11, 2012 8:11 am

if you do a full carbon rail wrap, this will work as a parabolic ( perimeter ) stringer.
With this construction you will not need any wood in the middle and btw. boards tend to break from the rails to the middle.
this is a picture of my standard lay up :

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 1 guest