Here you can exchange your experience and datas about your home build boards
-
elnica
- Rare Poster
- Posts: 11
- Joined: Tue Sep 20, 2011 5:12 pm
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
2 times
Postby elnica » Tue Sep 04, 2012 5:18 am
I made 4 large boards and still have about 60-70% of the epoxy that I bought. Anyone need some? It's the US Composites 3 to 1 ratio mix. You could probably make over 10 boards with this and the fins too if you have a mold. I'm moving in less than a month, it might be around the corner or it might be Puerto Rico so I need to get rid of all this stuff. Besides, I haven't even ridden all the boards I've made so I don't need to make any more.
I also have some E-Glass 6oz fiberglass, an unused metal roller (for bubbles), 3m mask with the side filters (used twice), unused large plastic measuring cups, unused paint brushes, unused syringes to measure small amounts, and other goodies you need to make a plyboard. I also have a mold to make 45mm fins out of epoxy.
If anyone is interested in anything let me know and I can calculate a price for you.
-
Nico
- Very Frequent Poster
- Posts: 2645
- Joined: Sun Jan 06, 2002 1:00 am
- Local Beach: private kitebeach on my doorstep,
Le Morne.
- Style: wave
- Gear: Drifter kites, wave boards
- Brand Affiliation: Cabrinha, naish
- Location: Mauritius, waterman since 1960
-
Has thanked:
0
-
Been thanked:
0
Postby Nico » Wed Sep 05, 2012 5:21 am
Do a good deed and send them to a third world country like Mauritius : )
Preferably to me
Nico
-
lehula
- Rare Poster
- Posts: 3
- Joined: Wed Sep 05, 2012 1:26 pm
- Local Beach: Santa Barbara and Long Beach
- Favorite Beaches: Belmont Shores (except for the dam Sting Rays)
- Style: Free Ride
- Gear: Naish Cult 2010 15m
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby lehula » Wed Sep 05, 2012 2:50 pm
Any chance you live in California? I'm going to build my first board for the main reason of saving money. Very cool of you to post this.
-
elnica
- Rare Poster
- Posts: 11
- Joined: Tue Sep 20, 2011 5:12 pm
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
2 times
Postby elnica » Wed Sep 05, 2012 4:55 pm
I live in Ohio but I can send you part of the epoxy if you don't want/need all of it. Minimum would be 12oz of resin and 4oz of hardner (3:1) for $10 plus shipping. That should be plenty for one board, maybe 2 if they aren't huge like the ones I made and you don't mix too much at once (so you don't waste too much). I'll throw in a few pairs of gloves and a measuring cup too.
or
15oz and 5oz for $12 plus shipping.
30oz and 10oz for $18 plus shipping.
Will include a few extra goodies for free (gloves, measuring cups, etc while they last)
-
lehula
- Rare Poster
- Posts: 3
- Joined: Wed Sep 05, 2012 1:26 pm
- Local Beach: Santa Barbara and Long Beach
- Favorite Beaches: Belmont Shores (except for the dam Sting Rays)
- Style: Free Ride
- Gear: Naish Cult 2010 15m
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby lehula » Thu Sep 06, 2012 1:36 am
Wow. When I saw how little it takes to do a board, I just went out and bought some. I appreciate the offer. Take care.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 52 guests