Contact   Imprint   Advertising   Guidelines

I Give You… The Chubby Girl! Under A $100 To Build!

Here you can exchange your experience and datas about your home build boards
User avatar
Starsky
Very Frequent Poster
Posts: 4373
Joined: Mon Apr 19, 2004 12:12 pm
Brand Affiliation: None
Location: Ontario
Has thanked: 0
Been thanked: 3 times

Re: I Give You… The Chubby Girl! Under A $100 To Build!

Postby Starsky » Wed Jul 31, 2013 1:56 pm

Every time I sell gear, its invariably to a beginner, I bring up the idea of making their first board a la gonzo. They all look at me in disgust and usually dont buy my stuff!

I wish people would get over themselves and give this a try. You can make a light wind beater in no time at no cost and its gonna get you further along the learning curve than the $700 board your going to end up on two seasons in.

JaZone
Medium Poster
Posts: 166
Joined: Sat May 18, 2013 2:14 am
Brand Affiliation: None
Has thanked: 3 times
Been thanked: 6 times

Re: I Give You… The Chubby Girl! Under A $100 To Build!

Postby JaZone » Fri Aug 30, 2013 1:58 am

you've inspired me to attempt to make something similar. I've got a board already , but I wanted something bigger
to make it easier for me to learn on.

I was thinking of using my board and making an attachment like the way you
use the second part of yours. I'm gonna get some 1/4 " plexi and attach it using the exisiting holes for the fins.
Stay tuned for the photos.

frankm1960
Very Frequent Poster
Posts: 1229
Joined: Sun Feb 04, 2007 10:48 pm
Local Beach: -Bayshore, at the end sea st. on saint John's west side, bay of fundy.
-Saints rest beach, at the end of sandy point road, irving nature park, saint john, west side.
Gear: Kites: 12m LF Mig, 9m LF Mig, 5m SS Fuel
Boards: LF proof 151cm, Real Wind 144cm, home made light wind board 160 x 50
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: I Give You… The Chubby Girl! Under A $100 To Build!

Postby frankm1960 » Fri Aug 30, 2013 12:20 pm

We built this in 2008... 2nd season of kiting... wanted to go in light winds. It works... no fins. We built two of them cause the first one worked so well.
It's roughly 50cm by 165. No fins... goes upwind real easy. It satisfied the light wind craze we had starting out. I haven't used it much since then tho.
That's an old pair of windsurf straps and some boom wrap for pads. Used a marine paint, 3 coats... still half a quart left.
Was a low cost alternative to 700 for a new one.
Also should add that it saved me from having to buy a light wind kite... used my regular kite and switched out boards when the winds picked up. So it was good for that... extended the session on both ends you might say... get out earlier and stay out longer I guess. Now I'm to old to stay out long :lol:
DSC01344.jpg
DSC01344.jpg (103.86 KiB) Viewed 3203 times

User avatar
Bille
Very Frequent Poster
Posts: 4022
Joined: Sun Sep 04, 2011 5:37 pm
Local Beach: Lake Mohave
Gear: Ozone Edge
Brand Affiliation: Barz Optics
Jaybar Dynabar V7
Has thanked: 252 times
Been thanked: 188 times

Re: I Give You… The Chubby Girl! Under A $100 To Build!

Postby Bille » Sat Aug 31, 2013 2:22 am

My first board was a 160 X 47 ; made it with 1/2" exterior ply
that i scored off a job-sight in the rubbish pile.

I measured the rocker off a similar board, and chocked up
some 2X4's that i ripped to the proper thickness.

Next up i tossed the pre-cut ply in a Hot jacuzzi for an hour or so, then
put it on my spacers with bricks on top & waited for it to dry.
Took two tries to get it right.

Bit of paint & cheep fins along with used bindings off a wind-surfer
and i had a board for under $30 bucks.

A (Fast / Cheap) Build, is a Better Build !!

Bille

SweetDoug
Rare Poster
Posts: 46
Joined: Tue Jun 30, 2009 8:37 pm
Local Beach: Oliphant/Sauble Beach, Canada, Ontario
Favorite Beaches: See Above
Gear: None yet
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: I Give You… The Chubby Girl! Under A $100 To Build!

Postby SweetDoug » Fri Oct 04, 2013 2:58 am

'
'
'

Still trying to get my stuff together and refine some design techniques and such, but it'll come.

SweetDoug

SweetDoug
Rare Poster
Posts: 46
Joined: Tue Jun 30, 2009 8:37 pm
Local Beach: Oliphant/Sauble Beach, Canada, Ontario
Favorite Beaches: See Above
Gear: None yet
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: I Give You… The Chubby Girl! Under A $100 To Build!

Postby SweetDoug » Fri Oct 04, 2013 3:01 am

I was thinking of using my board and making an attachment like the way you
use the second part of yours. I'm gonna get some 1/4 " plexi and attach it using the exisiting holes for the fins.
Stay tuned for the photos.[/quote]

I've been rolling around a design idea very similar, with a secondary hull that is the footpad/handle, and swappable primary hulls of different sizes from small to large.

Looking forward to the pictures.

SD

SweetDoug
Rare Poster
Posts: 46
Joined: Tue Jun 30, 2009 8:37 pm
Local Beach: Oliphant/Sauble Beach, Canada, Ontario
Favorite Beaches: See Above
Gear: None yet
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: I Give You… The Chubby Girl! Under A $100 To Build!

Postby SweetDoug » Fri Oct 04, 2013 3:03 am

I've wondered about the hot water treatment to bend the plywood. I figured it woodn't work.

I'm going with the glue setup for the rocker. Although I'm not sure I'm sold on what rocker actually does.

SD

BWD
Very Frequent Poster
Posts: 3848
Joined: Thu Jun 05, 2003 3:37 am
Has thanked: 2 times
Been thanked: 81 times

Re: I Give You… The Chubby Girl! Under A $100 To Build!

Postby BWD » Fri Oct 04, 2013 3:07 am

rocker makes surf sports fun for mortals
dont knock it
:idea:


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 54 guests