Contact   Imprint   Advertising   Guidelines

My second build the Super zero 142x41 cm

here you can exchange your experience and datas about your home build boards


zero-industries
Rare Poster
Posts: 3
Joined: Sat Sep 28, 2013 4:40 pm
Kiting since: 2010
Local Beach: Browersdam Holland
Vrouwenpolder
Style: Freestyle
Gear: 2 custom kiteboards
1 cabrinha kiteboard
2010 Best waroo 10m
2009 Best Bularoo 9m
2007 F-one Bandit uno
Brand Affiliation: None

My second build the Super zero 142x41 cm

Postby zero-industries » Sat Sep 28, 2013 9:59 pm

Hi my second build hope you like it.

Image
Image
using a wood plane to get the tips down to 3 mm

Image
i am using to use a mixture of epoxy, glass fiber and glass bubbles for the insert holes and stainless steel snowboard inserts.

Image
Image
setting up the rocker tabel to 5 cm center.

Image
the center of the board is 8mm and sloping down to the tips to 3mm, on the underside i made 3D water guide's.

Image
laying up the carbon (220 ud) for extra strength in the center and at the fin tips,
friend of mine broke his board at those points so i gave those points some extra attention.

Image
got the bottom done looking smooth need to sand down some spots, i am going to do a epoxy hot coat after i sanded the bottom and then put some UV lacquer on.

Image
did the top side, lay up glas 2x220ud 1x185kepper and 220ud carbon for the footpads, added some carbon strips that i had left over for decoration.

Image
Hope you like my new kitaboard!
i will post some more pictures after i have sanded, polishd and buffed the board.

greatz form Holland
Last edited by zero-industries on Tue Oct 01, 2013 12:01 am, edited 1 time in total.

plummet
Very Frequent Poster
Posts: 4831
Joined: Sat Aug 29, 2009 11:25 pm
Kiting since: 33
Local Beach: God created the naki so the hardcore people would have a place to live.
Favorite Beaches: Shhhhhhhhhhhhh...........
Style: Always searching for flow!
Gear: If you take 3.1415 from opinion. You get onion!
Brand Affiliation: What do yo call an Alligator in a vest? ............... An Investigator.

Re: My second build the Super zero 142x41 cm

Postby plummet » Sun Sep 29, 2013 4:36 am

interesting.

Though i'm not sold on the idea of carbon at the tips. that will stiffen the tips. which is opposite to what you want the tips to do. you want them to flex to absorb chop.

let us know how it goes.

User avatar
Bille
Very Frequent Poster
Posts: 2799
Joined: Sun Sep 04, 2011 5:37 pm
Kiting since: 2003
Local Beach: Lake Mohave
Gear: Ozone Edge
Brand Affiliation: Barz Optics
Jaybar Dynabar V7

Re: My second build the Super zero 142x41 cm

Postby Bille » Wed Oct 02, 2013 4:13 pm

Seriously GOOD workmanship ;
I enjoyed that , Thanks !!!

Bille


Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 2 guests