*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 19 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Kiteboard 131x42
PostPosted: Tue Oct 22, 2013 4:52 pm 
Offline
Rare Poster

Joined: Thu Sep 05, 2013 9:16 pm
Posts: 9
sijandy:
oki thanks for the reply, I have no makeup of the post you know. So we'll see, it's a board for the young. Otherwise, the core is poplar. After Paulownia I also watched but here in CZ can not get it.

boys and a clear coat here perhaps este seen on board, only the Nobile 2HD are small pieces and there is wood ok.


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Sun Oct 27, 2013 5:18 pm 
Offline
Rare Poster

Joined: Thu Sep 05, 2013 9:16 pm
Posts: 9
Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... some photos and perhaps better next time
Attachment:
_LEF8364.jpg
_LEF8364.jpg [ 1.9 MIB | Viewed 920 times ]

Attachment:
_LEF8361.jpg
_LEF8361.jpg [ 963.42 KIB | Viewed 920 times ]

Attachment:
_LEF8360.jpg
_LEF8360.jpg [ 1.26 MIB | Viewed 920 times ]

Attachment:
_LEF8356.jpg
_LEF8356.jpg [ 1.11 MIB | Viewed 920 times ]

Attachment:
_LEF8353.jpg
_LEF8353.jpg [ 1.2 MIB | Viewed 920 times ]

Attachment:
_LEF8352.jpg
_LEF8352.jpg [ 1.44 MIB | Viewed 920 times ]


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Sun Oct 27, 2013 6:30 pm 
Offline
Very Frequent Poster
User avatar

Joined: Sun Sep 04, 2011 5:37 pm
Posts: 1766
Raslikk wrote:
Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... ...


Unclear what you are intending here :

Did you WANT -- 6 cm deflection, and got 2.8 cm instead ; or other ... ?

Bille


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Sun Oct 27, 2013 7:04 pm 
Offline
Rare Poster

Joined: Thu Sep 05, 2013 9:16 pm
Posts: 9
Bille wrote:
Raslikk wrote:
Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... ...


Unclear what you are intending here :

Did you WANT -- 6 cm deflection, and got 2.8 cm instead ; or other ... ?

Bille




Yes of 6 cm 2.8 cm. Next time ladies around the hill more fabric. It was my first board ....


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Mon Oct 28, 2013 2:58 am 
Offline
Frequent Poster
User avatar

Joined: Mon Jul 01, 2013 7:16 am
Posts: 312
Location: Perth, Australia
Raslikk wrote:
Bille wrote:
Raslikk wrote:

Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... ...





Next time ladies around the hill more fabric.



Huh, someone is using the Google translator:) Raslikk, this in bold is difficult to understand even though I'm from the EU.

Now, about the board, it's called a spring back (6cm to 2.8cm), and yes, you got > 50%!!!

Your board looks heavy. Very good for a first one though!


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Tue Oct 29, 2013 2:23 pm 
Offline
Rare Poster

Joined: Thu Sep 05, 2013 9:16 pm
Posts: 9
Hello, thereabouts that all do not understand therefore I'm install new translator so perhaps it will be better:) St. in one's own line boards just so really about 50% and tomatoes stoped:( is that a damage, because by now board don't try out:( At our place is already cold:)
Next time will result better, largely perhaps thereabouts I know what I'm did badly, so we'll see.


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Tue Oct 29, 2013 4:57 pm 
Offline
Very Frequent Poster
User avatar

Joined: Sun Sep 04, 2011 5:37 pm
Posts: 1766
Raslikk wrote:
...
Next time will result better, largely perhaps thereabouts I know what I'm did badly, so we'll see.


It's always GOOD when you Learn something !

It would have bin Easy to make the board Stiffer, by adding a little
carbon Uni ; Hard to make them more flexible unless you start over. :(

But your wood-work looks AWESOME !!!!!!!!!!
A bit thinner on the tails, and a bit Less glass to start with ; add more
if needed on the next one.

Bille


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Tue Oct 29, 2013 5:22 pm 
Offline
Rare Poster

Joined: Thu Sep 05, 2013 9:16 pm
Posts: 9
Bille:
Carboniferous period at that is, then only on top of, from below I'm didn't arrange. but perhaps little and or be too hard core, we'll see next time how so will go against. Ted eye do see photo, kernel already is ready, is that a board 165x50. Kernel is less than 1 cm. So it radial I'll do from Carboniferous period, but if does anyone have some idea, like him dozer:)

Attachment:
IMAG0001.jpg
IMAG0001.jpg [ 849.37 KIB | Viewed 734 times ]


Top
Profile
 Post subject: Re: Kiteboard 131x42
PostPosted: Tue Nov 05, 2013 8:01 pm 
Offline
Frequent Poster
User avatar

Joined: Tue Feb 24, 2009 1:43 pm
Posts: 327
Location: Iv.G.-Slovenia
Nope, the new translator doesn't work either.


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 19 posts ]  Go to page Previous  1, 2

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group