Contact   Imprint   Advertising   Guidelines

Kiteboard 131x42

here you can exchange your experience and datas about your home build boards


Raslikk
Rare Poster
Posts: 15
Joined: Thu Sep 05, 2013 9:16 pm
Kiting since: 3
Gear: Flysurfer
Brand Affiliation: None

Re: Kiteboard 131x42

Postby Raslikk » Tue Oct 22, 2013 4:52 pm

sijandy:
oki thanks for the reply, I have no makeup of the post you know. So we'll see, it's a board for the young. Otherwise, the core is poplar. After Paulownia I also watched but here in CZ can not get it.

boys and a clear coat here perhaps este seen on board, only the Nobile 2HD are small pieces and there is wood ok.

Raslikk
Rare Poster
Posts: 15
Joined: Thu Sep 05, 2013 9:16 pm
Kiting since: 3
Gear: Flysurfer
Brand Affiliation: None

Re: Kiteboard 131x42

Postby Raslikk » Sun Oct 27, 2013 5:18 pm

Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... some photos and perhaps better next time
_LEF8364.jpg

_LEF8361.jpg

_LEF8360.jpg

_LEF8356.jpg

_LEF8353.jpg

_LEF8352.jpg

User avatar
Bille
Very Frequent Poster
Posts: 2691
Joined: Sun Sep 04, 2011 5:37 pm
Kiting since: 2003
Local Beach: Lake Mohave
Gear: Ozone Edge
Brand Affiliation: Barz Optics
Jaybar Dynabar V7

Re: Kiteboard 131x42

Postby Bille » Sun Oct 27, 2013 6:30 pm

Raslikk wrote:Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... ...


Unclear what you are intending here :

Did you WANT -- 6 cm deflection, and got 2.8 cm instead ; or other ... ?

Bille

Raslikk
Rare Poster
Posts: 15
Joined: Thu Sep 05, 2013 9:16 pm
Kiting since: 3
Gear: Flysurfer
Brand Affiliation: None

Re: Kiteboard 131x42

Postby Raslikk » Sun Oct 27, 2013 7:04 pm

Bille wrote:
Raslikk wrote:Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... ...


Unclear what you are intending here :

Did you WANT -- 6 cm deflection, and got 2.8 cm instead ; or other ... ?

Bille




Yes of 6 cm 2.8 cm. Next time ladies around the hill more fabric. It was my first board ....

User avatar
downunder
Very Frequent Poster
Posts: 727
Joined: Mon Jul 01, 2013 7:16 am
Kiting since: 1970
Gear: building my own
Brand Affiliation: None
Location: Perth, Australia

Re: Kiteboard 131x42

Postby downunder » Mon Oct 28, 2013 2:58 am

Raslikk wrote:
Bille wrote:
Raslikk wrote:
Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... ...





Next time ladies around the hill more fabric.



Huh, someone is using the Google translator:) Raslikk, this in bold is difficult to understand even though I'm from the EU.

Now, about the board, it's called a spring back (6cm to 2.8cm), and yes, you got > 50%!!!

Your board looks heavy. Very good for a first one though!

Raslikk
Rare Poster
Posts: 15
Joined: Thu Sep 05, 2013 9:16 pm
Kiting since: 3
Gear: Flysurfer
Brand Affiliation: None

Re: Kiteboard 131x42

Postby Raslikk » Tue Oct 29, 2013 2:23 pm

Hello, thereabouts that all do not understand therefore I'm install new translator so perhaps it will be better:) St. in one's own line boards just so really about 50% and tomatoes stoped:( is that a damage, because by now board don't try out:( At our place is already cold:)
Next time will result better, largely perhaps thereabouts I know what I'm did badly, so we'll see.

User avatar
Bille
Very Frequent Poster
Posts: 2691
Joined: Sun Sep 04, 2011 5:37 pm
Kiting since: 2003
Local Beach: Lake Mohave
Gear: Ozone Edge
Brand Affiliation: Barz Optics
Jaybar Dynabar V7

Re: Kiteboard 131x42

Postby Bille » Tue Oct 29, 2013 4:57 pm

Raslikk wrote:...
Next time will result better, largely perhaps thereabouts I know what I'm did badly, so we'll see.


It's always GOOD when you Learn something !

It would have bin Easy to make the board Stiffer, by adding a little
carbon Uni ; Hard to make them more flexible unless you start over. :(

But your wood-work looks AWESOME !!!!!!!!!!
A bit thinner on the tails, and a bit Less glass to start with ; add more
if needed on the next one.

Bille

Raslikk
Rare Poster
Posts: 15
Joined: Thu Sep 05, 2013 9:16 pm
Kiting since: 3
Gear: Flysurfer
Brand Affiliation: None

Re: Kiteboard 131x42

Postby Raslikk » Tue Oct 29, 2013 5:22 pm

Bille:
Carboniferous period at that is, then only on top of, from below I'm didn't arrange. but perhaps little and or be too hard core, we'll see next time how so will go against. Ted eye do see photo, kernel already is ready, is that a board 165x50. Kernel is less than 1 cm. So it radial I'll do from Carboniferous period, but if does anyone have some idea, like him dozer:)

IMAG0001.jpg

User avatar
zob
Frequent Poster
Posts: 430
Joined: Tue Feb 24, 2009 1:43 pm
Kiting since: 2006
Local Beach: Grado Pineta (IT), Fossalon (IT)
Style: Freeride, strapless hooked-in
Gear: FS S3 19m2 DLX
FS S3 CE 12m2 DLX
FS S4 8m2 DLX

Homemmade Alaias, TTs and wake skate, Naish Mutant 5´5½
MBS Pro90
Aboards Reverse 161 cm
Homemade POW SB 166 x 32,5 cm
Flow NX2 SE
Location: Iv.G.-Slovenia
Contact:

Re: Kiteboard 131x42

Postby zob » Tue Nov 05, 2013 8:01 pm

Nope, the new translator doesn't work either.


Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 6 guests