Here you can exchange your experience and datas about your home build boards
-
rtz
- Very Frequent Poster
- Posts: 640
- Joined: Mon Jan 24, 2011 6:47 am
- Kiting since: 2010
- Weight: 75kg
- Favorite Beaches: OBX
SPI
- Style: Freeride
- Gear: SlingShot, Switch.
- Brand Affiliation: None
-
Has thanked:
12 times
-
Been thanked:
12 times
Postby rtz » Thu Apr 13, 2017 5:55 pm
I have an older CF board(06-08?). It's got a lot of abrasions on the top and bottom. When the board is wet; it looks flawless.
I haven't attempted to sand or polish or use any chemicals on it. Is there anyway to get it looking like it does when it's wet when it's dry?
https://postimg.org/gallery/1ckde91hu/
-
rynhardt
- Very Frequent Poster
- Posts: 980
- Joined: Wed Sep 11, 2013 3:51 pm
- Local Beach: Langebaan
- Favorite Beaches: Langebaan
- Style: Freeride
- Gear: Cloud C2 17
Hoff Twinwave
- Brand Affiliation: None
- Location: Johannesburg, South Africa
-
Has thanked:
26 times
-
Been thanked:
30 times
Postby rynhardt » Thu Apr 13, 2017 6:01 pm
Maybe spray on a layer of good quality clear coat? And then sand and polish it.
-
plummet
- Very Frequent Poster
- Posts: 6819
- Joined: Sat Aug 29, 2009 11:25 pm
- Local Beach: EE
- Favorite Beaches: NZ
- Style: Terrain riding
- Gear: Old wornout ozone.
Plummet hydrofoil and mutant
- Brand Affiliation: None
-
Has thanked:
11 times
-
Been thanked:
224 times
Postby plummet » Thu Apr 13, 2017 7:45 pm
Who cares! its an old board. Ride it!
Otherwise sand smooth and polish. Or Spray clear coat on after sanding then polish.
Me, i'd just ride it.
-
JakeFarley
- Very Frequent Poster
- Posts: 920
- Joined: Sun Nov 27, 2016 11:54 pm
- Kiting since: 2001
- Weight: 92kg
- Local Beach: Florida Left Coast, USA
- Favorite Beaches: Any that are not crowded.
- Style: Dinosaur style (Velociraptor)
- Gear: Kites: Flysurfer Speed5 21m, Soul 12m, Cabrinha 16m Xbow, 11m Xbow, Best 14m HP Nemesis, 9m Yarga C Hybrid
Boards: Crazyfly 135 x 46 Pro, Cabrinha Spoiler 140, 6' custom surfboard, 122 x 46 custom twintip
Wing foil: Naish Hover 110l, Slingwing 6.4m, F-One CWC Strike 8m, Slingshot Hover Glide Fwing (Infinity 99), Slingshot Phantasm 926 and E 990
- Brand Affiliation: None
- Location: Pearl City
-
Has thanked:
187 times
-
Been thanked:
144 times
Postby JakeFarley » Sun Apr 30, 2017 3:24 pm
rynhardt wrote: ↑Thu Apr 13, 2017 6:01 pm
Maybe spray on a layer of good quality clear coat? And then sand and polish it.
Any recommendations on what to use to coat? I too have an old CF board where the deck has "checkered" from the sun but the bottom is pretty good.
-
rynhardt
- Very Frequent Poster
- Posts: 980
- Joined: Wed Sep 11, 2013 3:51 pm
- Local Beach: Langebaan
- Favorite Beaches: Langebaan
- Style: Freeride
- Gear: Cloud C2 17
Hoff Twinwave
- Brand Affiliation: None
- Location: Johannesburg, South Africa
-
Has thanked:
26 times
-
Been thanked:
30 times
Postby rynhardt » Sun Apr 30, 2017 6:01 pm
No real recommendations, sorry. I think any reasonable quality clear coat will be fine.
Just be wary of any existing pin holes on the existing surface. They're generally a pain to get rid of, you may need a filling compound.
-
JakeFarley
- Very Frequent Poster
- Posts: 920
- Joined: Sun Nov 27, 2016 11:54 pm
- Kiting since: 2001
- Weight: 92kg
- Local Beach: Florida Left Coast, USA
- Favorite Beaches: Any that are not crowded.
- Style: Dinosaur style (Velociraptor)
- Gear: Kites: Flysurfer Speed5 21m, Soul 12m, Cabrinha 16m Xbow, 11m Xbow, Best 14m HP Nemesis, 9m Yarga C Hybrid
Boards: Crazyfly 135 x 46 Pro, Cabrinha Spoiler 140, 6' custom surfboard, 122 x 46 custom twintip
Wing foil: Naish Hover 110l, Slingwing 6.4m, F-One CWC Strike 8m, Slingshot Hover Glide Fwing (Infinity 99), Slingshot Phantasm 926 and E 990
- Brand Affiliation: None
- Location: Pearl City
-
Has thanked:
187 times
-
Been thanked:
144 times
Postby JakeFarley » Sun Apr 30, 2017 9:25 pm
Thanks for the advice on the pinholes. I have not noticed any, but I will check up close. I have a can of Krylon clear, non-yellowing that I will test first. Can't make it look any worse than it is.
-
JakeFarley
- Very Frequent Poster
- Posts: 920
- Joined: Sun Nov 27, 2016 11:54 pm
- Kiting since: 2001
- Weight: 92kg
- Local Beach: Florida Left Coast, USA
- Favorite Beaches: Any that are not crowded.
- Style: Dinosaur style (Velociraptor)
- Gear: Kites: Flysurfer Speed5 21m, Soul 12m, Cabrinha 16m Xbow, 11m Xbow, Best 14m HP Nemesis, 9m Yarga C Hybrid
Boards: Crazyfly 135 x 46 Pro, Cabrinha Spoiler 140, 6' custom surfboard, 122 x 46 custom twintip
Wing foil: Naish Hover 110l, Slingwing 6.4m, F-One CWC Strike 8m, Slingshot Hover Glide Fwing (Infinity 99), Slingshot Phantasm 926 and E 990
- Brand Affiliation: None
- Location: Pearl City
-
Has thanked:
187 times
-
Been thanked:
144 times
Postby JakeFarley » Thu May 04, 2017 2:56 pm
Here's my CF before and after. I wet sanded the top sheet with 400 emery and sprayed with Krylon Clear. Had some problems with humidity, heat, but it looks a lot better. Will maybe wet sand it again and put another coat later.
-
rynhardt
- Very Frequent Poster
- Posts: 980
- Joined: Wed Sep 11, 2013 3:51 pm
- Local Beach: Langebaan
- Favorite Beaches: Langebaan
- Style: Freeride
- Gear: Cloud C2 17
Hoff Twinwave
- Brand Affiliation: None
- Location: Johannesburg, South Africa
-
Has thanked:
26 times
-
Been thanked:
30 times
Postby rynhardt » Thu May 04, 2017 7:50 pm
JakeFarley wrote: ↑Thu May 04, 2017 2:56 pm
Here's my CF before and after. I wet sanded the top sheet with 400 emery and sprayed with Krylon Clear. Had some problems with humidity, heat, but it looks a lot better. Will maybe wet sand it again and put another coat later.
Yep, that's generally the process. Paint, sand, paint, sand.. until it either looks good enough or you get tired
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 159 guests