Here you can exchange your experience and datas about your home build boards
-
jmach
- Medium Poster
- Posts: 83
- Joined: Thu Jan 30, 2014 12:28 am
- Gear: none
- Brand Affiliation: None
-
Has thanked:
29 times
-
Been thanked:
13 times
Postby jmach » Wed Sep 06, 2017 4:18 pm
I have a Mako that's nicely scratched and marred up. I'm considering repainting it over winter, any suggestions on what paint to use, prepping the surface or even if this is advisable at all.
This is an older link but is this a viable method?
https://www.jamestowndistributors.com/u ... nent+Paint
Thanks
-
gilana
- Medium Poster
- Posts: 133
- Joined: Sun Jun 22, 2014 1:34 am
- Kiting since: 2014
- Weight: 70KG
- Local Beach: We live on our sailing yacht and at the moment we are in the San Blas Islands of Panama, and we sometimes have visiting guests to come spend a week of wind with us...
Laura and Mike
- Favorite Beaches: Chameys in San Andres Isla Colombia
Yansaladup in Kuna Yala Panama
- Style: Old School
- Gear: Ozone Edge 9m V8
Ozone Edge 9m V9
Ozone Edge 10m V9
Caution Santa Cruz Redline 132 TT
Epic Droid V2 135x41 TT
Chemical 132 TT
North Directional
- Brand Affiliation: None, I wish.
- Location: San Blas Panama
-
Has thanked:
3 times
-
Been thanked:
1 time
-
Contact:
Postby gilana » Fri Sep 08, 2017 6:53 pm
My TT has been hammered and is still in use after lots of work.
The best paint is 2 part Polyurethane. Don't worry about finish on the lower surface, as that must be wet sanded with a foam sanding block anyway. The best finish is from 800 grit, after flattening with 220.
Any other one component paint just does not get hard enough for scratch resistance.
Scratches should be filled with epoxy before painting, and the reform the sharp edge, I use JB Weld. Hard as hell, and keeps the edge sharp.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 54 guests