GregWoj wrote:So I don't get the risk. So what if the coil gets stuck in the bottom bungee handle? My 2013 bar appears to have the same design. Im able to shove the spring in there and then it clicks out. I do the same on my 2015 bar with same amount of pressure/force. Exact same reaction with the same stress force.
I wish the recall was something like "We are recalling because realized that we made the 2015 bar way too annoying to wind up" Anyone else hate the wind up?!
And... yet another reason for Cabrinha to finally ditch the bungee straps and use a rope and cleat!!!!
It reads like not every batch is wrong, so you may have got one of the better ones.
At least they are fixing the problem.
I had an 09 Xbow pulley fail through rust and although they knew there were batches of faulty pulleys, the policy seemed to be that they would replace each one when it failed, so I bought 2 whole new sets of pulleys because the pulleys on both my kites were rusting.
I think its good that they are fixing the problem like this, but they should have a tracing system to allow them to contact everyone with a faulty bar. It is a safety issue if the depower jams.
Yes I do hate the windup of the 2013 bar. Its difficult not to get a kink in the tube and there is a lot of bulk to it.