Contact   Imprint   Advertising   Guidelines

Surfboard Blank Selection

The forum for wave kiters.

Rare Poster
Posts: 2
Joined: Fri Oct 09, 2009 6:14 pm
Kiting since: 8
Local Beach: Lincoln Beach, Provo Utah South Sandy Beach, Provo Utah Barbwire Beach, Heber Utah
Favorite Beaches: All Of Above
Style: povered pop tricks unhooked stapless
Gear: 07 Waroos 7m 13m 17m
Home made plyboards LWF Recoil
Brand Affiliation: None

Surfboard Blank Selection

Postby chark764 » Fri Oct 09, 2009 7:41 pm

Looking for some help picking a blank for my first
surfstyle board. If anyone is building their own boards,'
Im looking to shape a 6-6 2" high performance board with some flat water
freeride capibility.

cRAZY Canuck
Frequent Poster
Posts: 246
Joined: Fri Oct 06, 2006 4:12 am
Kiting since: 0
Brand Affiliation: None
Location: Sydney

Re: Surfboard Blank Selection

Postby cRAZY Canuck » Sat Oct 10, 2009 5:54 am

Some of what will define the blank is how your going to build/laminate.

If your going to use Polyester resin that rules out an EPS core due to the fact it will melt it.

Depending on who your going to buy a PU core from depicts there "grading", if you go a PU core I'd go with a weight that they recomend for longboards.

if your going to go an EPS core I'd be looking at a 2 - 2.5 Lbs foam (normal surfboards are using 1lbs)

One plus for EPS foam is if your a weekend builder like me the blank tends to stand up to being moved around a bit more than a PU one does.

Personally I'd use an EPS foam with Epoxy resin, but thats me.

Medium Poster
Posts: 66
Joined: Mon Jun 08, 2009 6:07 pm
Kiting since: 2012
Local Beach: VB
Favorite Beaches: ES SS
Style: Wake n Surf
Gear: C-Kites
Brand Affiliation: Nabisco
Location: 20 steps to the beach

Re: Surfboard Blank Selection

Postby vbnhatty » Sun Oct 11, 2009 1:25 am

If your on the east coast in the US hit me up for blanks we have 800+ in stock eps and poly. I would go the eps route and depending on how big the waves your going to ride in decides how long you should go. I ride a 5'9 5'10 and 6'0 behind the kite with my 5'9 being the one I ride more. I don't shape my own boards cause the shapers here will do it for me in 3 hours and it would take me forever and it would probably suck. I would say don't go thicker than than 2 1/4 unless you want to surf it too.
But we have the foam, cloth and resin if you need it.

User avatar
crazy Horse
Rare Poster
Posts: 18
Joined: Tue May 11, 2004 10:07 pm
Kiting since: 0
Brand Affiliation: None
Location: POLAND

Re: Surfboard Blank Selection

Postby crazy Horse » Sun Oct 11, 2009 11:42 am

Then look for Skill it Cabrinha, its awsome board.
I loved it for some old shool frestyle on flat water.
Perfect, amzaing planning in low wind condiitons.
And in waves you go everwhere from small shorebrake to medium point brake.

Return to “Wave Kite”

Who is online

Users browsing this forum: No registered users and 2 guests