Forum for kitesurfers
-
spacemonkey
- Medium Poster
- Posts: 148
- Joined: Mon Aug 18, 2003 9:10 pm
-
Has thanked:
0
-
Been thanked:
0
Postby spacemonkey » Tue Jun 05, 2012 7:39 pm
j0nes wrote:spacemonkey, is the weight of 7.8kg from last year's board with or without straps? My North Race LTD 2011 recently drank a bit of water by leaking fin boxes, and I am not sure if I got the water completely out again.
Jonas
Without straps and fins.
-
spacemonkey
- Medium Poster
- Posts: 148
- Joined: Mon Aug 18, 2003 9:10 pm
-
Has thanked:
0
-
Been thanked:
0
Postby spacemonkey » Tue Jun 05, 2012 7:45 pm
swell wrote:dont forget to put silicon in every hole befor fitting the straps and make sure the airvalve is closed.
What Rista fins do you have? Ordered online or have you been testing some befor?
I tested the black edition (41,5 front/38 back, cant 2,7°) , i got them through another racer (some guy found them to expensive) , the waiting list is too long so i decided quickly.
I have another set from Jayfactory (look at windsurfing fins.co.uk) no cant, they also go very good, little less control, but slightly better upwind.
now give me some wind!
-
Silver321
- Rare Poster
- Posts: 8
- Joined: Sun Jun 10, 2012 6:40 pm
- Local Beach: Estonia,Tallinn, Pirita
- Favorite Beaches: Pirita
- Style: kitefoil
- Gear: Z foil, Aeros kites, Elf, Temavento
- Brand Affiliation: Xxx
-
Has thanked:
0
-
Been thanked:
0
Postby Silver321 » Mon Jun 11, 2012 2:14 pm
hi there! I got my new 2012 model north race ltd 3 weeks ago(last week of may). Then i fixed the weight 6,7kg, this was without straps and fins! Before surfing i closed all screwholes with silicon! But after 3-weeks surfing i checked weight again! And
7.8kg! This is without straps and fins! water coming out from finboxes. Chines production are for one time useing
-
spacemonkey
- Medium Poster
- Posts: 148
- Joined: Mon Aug 18, 2003 9:10 pm
-
Has thanked:
0
-
Been thanked:
0
Postby spacemonkey » Mon Jun 11, 2012 6:03 pm
Silver321 wrote:hi there! I got my new 2012 model north race ltd 3 weeks ago(last week of may). Then i fixed the weight 6,7kg, this was without straps and fins! Before surfing i closed all screwholes with silicon! But after 3-weeks surfing i checked weight again! And
7.8kg! This is without straps and fins! water coming out from finboxes. Chines production are for one time useing
Damn, that ain't good.
What's the serial number and is this a warranty case?
-
lobodomar
- Frequent Poster
- Posts: 271
- Joined: Tue Jul 15, 2008 1:40 pm
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
0
Postby lobodomar » Mon Jun 11, 2012 6:22 pm
Silver321 wrote:hi there! I got my new 2012 model north race ltd 3 weeks ago(last week of may). Then i fixed the weight 6,7kg, this was without straps and fins! Before surfing i closed all screwholes with silicon! But after 3-weeks surfing i checked weight again! And
7.8kg! This is without straps and fins! water coming out from finboxes. Chines production are for one time useing
Interesting first post
Please inform the board's serial number, this way one can understand whether it belongs to the first batches or not (as I understood, the latest batches should have had the problem fixed)
The board is definitely under warranty and North is no Royal..
Drinking water is a malfunction and should be covered by warranty, so contact your dealer and go for it.
-
Silver321
- Rare Poster
- Posts: 8
- Joined: Sun Jun 10, 2012 6:40 pm
- Local Beach: Estonia,Tallinn, Pirita
- Favorite Beaches: Pirita
- Style: kitefoil
- Gear: Z foil, Aeros kites, Elf, Temavento
- Brand Affiliation: Xxx
-
Has thanked:
0
-
Been thanked:
0
Postby Silver321 » Mon Jun 11, 2012 6:57 pm
Thanks guys for replay!Yes it schould be warranty case, i gived my board back to local dealer today and hope that they will solve problem fast!? Not fun stay without this, what i have waiting for months. Seoson running... I will be back with serialnumber tomorrow .
-
Silver321
- Rare Poster
- Posts: 8
- Joined: Sun Jun 10, 2012 6:40 pm
- Local Beach: Estonia,Tallinn, Pirita
- Favorite Beaches: Pirita
- Style: kitefoil
- Gear: Z foil, Aeros kites, Elf, Temavento
- Brand Affiliation: Xxx
-
Has thanked:
0
-
Been thanked:
0
Postby Silver321 » Tue Jun 12, 2012 8:12 am
Here is serialnumber of my North Race LTD, 2012 model: SNJNK12RL6900030
-
spacemonkey
- Medium Poster
- Posts: 148
- Joined: Mon Aug 18, 2003 9:10 pm
-
Has thanked:
0
-
Been thanked:
0
Postby spacemonkey » Tue Jun 12, 2012 12:50 pm
Silver321 wrote:Here is serialnumber of my North Race LTD, 2012 model: SNJNK12RL6900030
Think this is an early bird (first batch)
my number ends on 139
-
lobodomar
- Frequent Poster
- Posts: 271
- Joined: Tue Jul 15, 2008 1:40 pm
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
0
Postby lobodomar » Fri Jun 15, 2012 2:57 pm
Mine arrived today, serial 0076.
Very disappointed with the fin geometry, with the aft finbox clearly tilted in relation to the longitudinal axis of the board. Contacted the importer, let's see how it turns out.
-
Attachments
-
-
-
ChristoffM
- Medium Poster
- Posts: 196
- Joined: Tue Jul 19, 2011 5:26 pm
- Local Beach: Langebaan and Cape Town.
- Favorite Beaches: Anywhere in the Cape, South Africa.
- Style: Hydrofoils! (And surf and old school)
- Gear: Cape Town Foilboard and Spotz hydrofoils.
Any kite that can keep up with the hydrofoils.
- Brand Affiliation: Cape Town Foilboards
- Location: Langebaan (Cape Town)
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby ChristoffM » Fri Jun 15, 2012 3:56 pm
Dude, that looks horrible! My home made board that took less than 3 weekends to complete looks better than that. I would not be happy.
Did you measure from the sides of the board to the fin?
Return to “Kitesurfing”
Who is online
Users browsing this forum: Baidu [Spider], Bartolo, Bing [Bot], Breze, decay, diogoveb, Exal, gl, Gonzavala, i_love_storm, IDAVIS, jannik, Mikkelza, Pera, Trent hink, Ventum, zlatko23 and 164 guests