Forum for kitesurfers
-
darippah
- Very Frequent Poster
- Posts: 628
- Joined: Sun Apr 22, 2012 9:07 pm
- Kiting since: 2011
- Weight: 165
- Local Beach: New Jersey, USA
- Style: Hydrofoil big air
- Gear: Sonic 3 13m , Soul 7 and 10m
- Brand Affiliation: None
-
Has thanked:
7 times
-
Been thanked:
24 times
Postby darippah » Tue May 27, 2014 4:36 am
bought a cheap set of 10m lines on ebay and the ends seem to catch on other lines due to the way they were made. any ideas on how to fix this? thinking to try duck tape... unless I can just cut the pieces off?
see attached image for what the issue is
dont have a sewing machine
sorry for the dumb question
-
Attachments
-
-
Rattlehead
- Rare Poster
- Posts: 20
- Joined: Sat Apr 14, 2012 1:19 pm
- Local Beach: Brighton, Qld
- Style: Freeride / race
- Gear: 2012 North rebel 13 m
2012 North fuse 9 m
2008 north rhino 12 m
2010 Eh ovando 11 m
2011 x19 spleene 19 m
2008 135x35 north phantom
2010 140x41 nobile 50/50
2012 naish Venturi 190x70
- Brand Affiliation: None
- Location: Brisbane ,Australia
-
Has thanked:
0
-
Been thanked:
0
Postby Rattlehead » Tue May 27, 2014 9:28 am
Try getting some heat shrink , just be very careful heating it on , too much heat could damage the lines , use a heat gun or hair dryer , don't use a naked flame.
-
Tfcm
- Medium Poster
- Posts: 127
- Joined: Tue Apr 08, 2014 8:38 pm
- Local Beach: Botany Bay, Cronulla, Kurnell, Umina Beach
- Style: Race, Foil & Wave
- Gear: TemaVento RC70
Custom DIY Foil
Custom wave boards
Naish Park
ASV
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Tfcm » Tue May 27, 2014 10:37 am
A little bit of whipping twine would clean that up..
Return to “Kitesurfing”
Who is online
Users browsing this forum: andylc, Baptiste_FR, billybob, Blackened, evan, Exal, Hessel, jur0, Kitemenn, mati, rw30, SolarSet, Sun, thewindego, tilmann, Tony in FL, Vivo3d, Wrenit, xoen and 349 guests