Ozone Edge Micro loop conversion
Posted: Thu Nov 07, 2013 6:19 pm
I've moved away from North to Ozone. In doing that I wanted to keep the micro loop
The conversions was really simple. I will drill the Ozone Bar later and use it (its also a much nicer bar).
Here are the pictures.
The only line you need to replace is the emergency line from the steel "y" back to the Ironhart clip. I had a spare line from the fly surfer days and it worked like a charm. This line is a bit tricky.
The line needs to have a knot big enough to hold the ball at the "y" but small enough to pass through the Iron Hart
So if you want a micro loop on the Edge no issue!
The conversions was really simple. I will drill the Ozone Bar later and use it (its also a much nicer bar).
Here are the pictures.
The only line you need to replace is the emergency line from the steel "y" back to the Ironhart clip. I had a spare line from the fly surfer days and it worked like a charm. This line is a bit tricky.
The line needs to have a knot big enough to hold the ball at the "y" but small enough to pass through the Iron Hart
So if you want a micro loop on the Edge no issue!