the Project was aimed at learning how to build a Wood foil and learn vaccum lamination.
I must confess that i enjoyed it obsesively for the last month.
the lamination is the trickiest part to get the mirror finish but i guess perfection will come with practice.
can the bubles be filled by drilling a small hole and injecting resin?
all the wings are 0 degreed in triming.
i hace built several PET shims from coke bottles to increase angle of wings.
it will be very hard to find someone that rides a foil in these parts of the countryside.
i ve seen all the videos i could find and the only way to learn ist to spend some time on it!
i hope im a fast learner
I ran out of carbón and resin so this design will have to do for now.
Specs came out like this:
the hole setup with board is 7.1 kilos
front wing is 756 cm2 x 170mm chorr lenght.x 470cm span x 9mm chord thickness.
back wing is 360cm2 x 110mm chord lenght x 400cm span x 9mm chord thickness.
fuselaje cameout at 730mm from tip to tip x 60mm tall x 32mm wide.
strut is 24.5mm thickness x 142mm chord x 870mm tall.
foil is epller 817 on keel and half half on wings.
all winggs are trimmed at 0 degree.
vessel will be name Helena after my litle daughter
She has enjoyed seen me built her plane.!! her words.
Will ride thiss weekend and shoot video.
hope to get feedback from teh video from experienced riders.
slimer everything from keel to wings.