I've decided it's time. I'm going to try and mimic Denisesewa (viewtopic.php?f=196&t=2386805) to some extent (which is based on the seabreeze plans by Phezulu1). I found a local source of okoume (3 or 4mm, not sure which yet) that I'll be using for the core.
I've made dxf drawings to represent the dimensions Phezulu1 used:
http://www.thingiverse.com/thing:584300
I've done some reading, looked at some dimensions, and read a lot of stuff that doesn't really make a whole lot of sense to me....I just want to build something to learn on honestly....
So now I've got some questions:
1. I see that a lot of things work, maybe some better than others, but that 'machine tolerances' aren't really a requirement. That said, some people seem to use flat wings, and some positive lift in the front and negative lift in the rear...why and what?
2. When someone says, "I have a 960mm mast", are they measuring from the top of the fuselage or is it the whole assembly?
3. There will be more I'm sure....