Here you can exchange your experience and datas about your home build boards
-
TPink
- Medium Poster
- Posts: 150
- Joined: Tue Nov 09, 2010 10:00 pm
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby TPink » Sun Jan 12, 2014 12:01 am
Just wondering what is a good alt adhesive to glue two 1" blanks together on a rocker table.
last board I did, I used epoxy, but its probably overkill and expensive.
Thanks,
-
tkettlepoint
- Very Frequent Poster
- Posts: 782
- Joined: Sun Feb 12, 2006 8:16 pm
- Gear: Jellyfish boards custom boards
- Brand Affiliation: Jellyfish Boards
- Location: Kettle Point Ontario Canada
-
Has thanked:
0
-
Been thanked:
0
Postby tkettlepoint » Sun Jan 12, 2014 1:32 am
http://www.excelglue.com/ best stuff on the market and the best price you will find.
we use the excel one to glue up the blanks.
Terrie
www.jellyfishboards.com
-
saildawg
- Medium Poster
- Posts: 134
- Joined: Tue Feb 19, 2013 4:28 pm
- Local Beach: Isla Holbox, Kootenay Lake
- Favorite Beaches: Isla Holbox, Hood River, Squamish, Oregon Coast
- Style: Freeride
- Gear: Slingshot
- Brand Affiliation: None
- Location: BC, Canada/Mexico
-
Has thanked:
0
-
Been thanked:
0
Postby saildawg » Sun Jan 12, 2014 3:00 pm
Resorcinol is the best by far.
-
tkettlepoint
- Very Frequent Poster
- Posts: 782
- Joined: Sun Feb 12, 2006 8:16 pm
- Gear: Jellyfish boards custom boards
- Brand Affiliation: Jellyfish Boards
- Location: Kettle Point Ontario Canada
-
Has thanked:
0
-
Been thanked:
0
Postby tkettlepoint » Sun Jan 12, 2014 3:40 pm
for a wooden board with tight joints I will agree but a foam board with little pockets here and they PU would be better, it foams up fills all voids make it solid. but that is my 2 cents
terrie
and yes I build both.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 55 guests