A forum dedicated to Hydrofoil riders
-
plummet
- Very Frequent Poster
- Posts: 6819
- Joined: Sat Aug 29, 2009 11:25 pm
- Local Beach: EE
- Favorite Beaches: NZ
- Style: Terrain riding
- Gear: Old wornout ozone.
Plummet hydrofoil and mutant
- Brand Affiliation: None
-
Has thanked:
11 times
-
Been thanked:
224 times
Postby plummet » Sun Apr 15, 2018 7:16 pm
These boards are looking real good. They even have some nose rocker too. How is the flex? Are the stiff enough?
-
Peter_Frank
- Very Frequent Poster
- Posts: 12735
- Joined: Wed Oct 16, 2002 1:00 am
- Brand Affiliation: None
- Location: Denmark
-
Has thanked:
1007 times
-
Been thanked:
1187 times
Postby Peter_Frank » Sun Apr 15, 2018 11:22 pm
KVL wrote: ↑Sun Apr 15, 2018 12:32 pm
Wasnt it quite difficult to ride - I mean with the nose, tail and the direction the foil points?.. Seems a bit odd that you could get on it, or?..
Are you aware it is a canard hydrofoil, which is ridden with the small wing in front ?
PF
-
KVL
- Medium Poster
- Posts: 90
- Joined: Thu Aug 18, 2011 8:25 am
- Brand Affiliation: None
-
Has thanked:
14 times
-
Been thanked:
6 times
Postby KVL » Mon Apr 16, 2018 7:14 am
No, didnt know so! Interresting!
Sorry for my comment then!
-
bragnouff
- Very Frequent Poster
- Posts: 1535
- Joined: Tue May 14, 2002 1:00 am
- Kiting since: 1999
- Local Beach: New Brighton
- Gear: Boards: Alkita boards
Zeeko Slash/AirWave/Scrambler
Amundson Johno
Foils: Spitfire XLW/ XXLW. GoFoil NL130/160/190
Kites: FS Peaks
HB Legion
Wings:Zeeko Carve
HB Flair/Guide...
- Brand Affiliation: GK enthusiast / Zeeko & HB Pimp
- Location: 43.5320° S, 172.6306° E
-
Has thanked:
82 times
-
Been thanked:
338 times
-
Contact:
Postby bragnouff » Tue Apr 17, 2018 7:22 am
plummet wrote: ↑Sun Apr 15, 2018 7:16 pm
These boards are looking real good. They even have some nose rocker too. How is the flex? Are the stiff enough?
There's still a little bit of flex, but I'd say it's stiff enough. Only 3 sessions into it and it's getting better and better each time.
-
juandesooka
- Very Frequent Poster
- Posts: 1193
- Joined: Wed Aug 29, 2012 8:05 pm
- Kiting since: 2011
- Local Beach: Sooke, BC, Canada
- Style: Canada's Kai Lenny (in my mind)
- Gear: Ocean Rodeo wings&kites / GoFoil
- Brand Affiliation: Open to offers
-
Has thanked:
88 times
-
Been thanked:
97 times
Postby juandesooka » Sat May 05, 2018 5:46 am
Here’s my go at it. Seems to have pros and cons so far.
Pros:
Really nimble under foot. Feels like turns are tighter with less swing weight (may be my imagination)
A lot lighter overall
Cons:
Body dragging out past the kelp is slightly harder.
Quite challenging in low wind. At times I’ve had it submerged more than knee deep (and sometimes pull it off)
If it touches down have to lean back to ensure nose doesn’t dig in. Was a little harder in gusty variable wind to not get pulled off or dig in.
Lose the board and it’s nearly invisible, plus it doesn't float fast downwind like a floaty surfboard -- first body drag back to a board in a long time. Need to paint it bright colour, maybe attach something on the nose to sit above the water line (back to the old go joe?)
I may install a kickpad at rear to give something more to lean into.
All in all, pretty fun, viva la difference.
-
Attachments
-
-
-
jumptheshark
- Very Frequent Poster
- Posts: 2169
- Joined: Fri Nov 10, 2017 6:36 pm
- Local Beach: Shhhhh
- Favorite Beaches: Nude
- Gear: The good stuff
- Brand Affiliation: None
-
Has thanked:
387 times
-
Been thanked:
707 times
Postby jumptheshark » Sat May 05, 2018 7:01 am
Im telling you, a skate is just that little bit too small for a lighter wind get up. The skim is about the right size and rocker to make it work.
-
juandesooka
- Very Frequent Poster
- Posts: 1193
- Joined: Wed Aug 29, 2012 8:05 pm
- Kiting since: 2011
- Local Beach: Sooke, BC, Canada
- Style: Canada's Kai Lenny (in my mind)
- Gear: Ocean Rodeo wings&kites / GoFoil
- Brand Affiliation: Open to offers
-
Has thanked:
88 times
-
Been thanked:
97 times
Postby juandesooka » Sat May 05, 2018 7:43 am
jumptheshark wrote: ↑Sat May 05, 2018 7:01 am
Im telling you, a skate is just that little bit too small for a lighter wind get up. The skim is about the right size and rocker to make it work.
this wakeskate found it's way to me relatively cheap. Fun experiment. I'll watch for a skim.
-
bragnouff
- Very Frequent Poster
- Posts: 1535
- Joined: Tue May 14, 2002 1:00 am
- Kiting since: 1999
- Local Beach: New Brighton
- Gear: Boards: Alkita boards
Zeeko Slash/AirWave/Scrambler
Amundson Johno
Foils: Spitfire XLW/ XXLW. GoFoil NL130/160/190
Kites: FS Peaks
HB Legion
Wings:Zeeko Carve
HB Flair/Guide...
- Brand Affiliation: GK enthusiast / Zeeko & HB Pimp
- Location: 43.5320° S, 172.6306° E
-
Has thanked:
82 times
-
Been thanked:
338 times
-
Contact:
Postby bragnouff » Sat May 05, 2018 12:45 pm
juandesooka wrote: ↑Sat May 05, 2018 5:46 am
(...) Need to paint it bright colour, maybe attach something on the nose to sit above the water line (back to the old go joe?)
No such problem with the Zeeko wakeskate! All that deck foam gives plenty of float! And well... Can't beat yellow!
Rails are easy to grab, and the Spitfire setup makes it quite balanced overall
-
butterfish
- Rare Poster
- Posts: 26
- Joined: Sat Jan 27, 2018 4:03 pm
- Gear: trying to keep it simple
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
1 time
Postby butterfish » Sat May 05, 2018 1:42 pm
do you seal the holes in the deck with epoxy to make it water resistant?
-
juandesooka
- Very Frequent Poster
- Posts: 1193
- Joined: Wed Aug 29, 2012 8:05 pm
- Kiting since: 2011
- Local Beach: Sooke, BC, Canada
- Style: Canada's Kai Lenny (in my mind)
- Gear: Ocean Rodeo wings&kites / GoFoil
- Brand Affiliation: Open to offers
-
Has thanked:
88 times
-
Been thanked:
97 times
Postby juandesooka » Sat May 05, 2018 4:35 pm
butterfish wrote: ↑Sat May 05, 2018 1:42 pm
do you seal the holes in the deck with epoxy to make it water resistant?
I didn't. Drilled 4 holes and had at her, as per the Green Hat video way back on page 1. Probably should, for longevity. I have a paipo made by a friend, he used arrow shafts glassed in as "through hulls". I've done the same with golf club shafts, though the hassle is they are tapered.
Return to “Hydrofoil”
Who is online
Users browsing this forum: alekbelia, fleetrico, Google [Bot] and 209 guests