A forum dedicated to Hydrofoil riders
-
tswierkocki
- Frequent Poster
- Posts: 299
- Joined: Sat Feb 19, 2005 8:16 pm
- Kiting since: 2001
- Style: Hydrofoil, Surf, Freeriding
- Gear: 3m, 4m, 5m, 8m Flysurfer Peak 4 kites
7m, 10m Cabrinha Apollo kites
Cloud F28 surf foil
107cm Kanaha pocket board for kite foiling
4’8” Stretch Trow surfboard
133 Axis Vanguard twintip
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
8 times
Postby tswierkocki » Tue Apr 24, 2018 2:48 am
Does anyone know of a company who sells an adapter to mount a foil with 90X140 hole spacing on a board with 90X165 insert spacing?
Has anyone built an adapter? Recommendations?
I'd rather not add additional inserts to my board.
-
BigSky
- Medium Poster
- Posts: 107
- Joined: Fri Jan 06, 2017 11:29 am
- Local Beach: Duxbury
- Gear: Flysurfer, BRM and Lift
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
9 times
Postby BigSky » Tue Apr 24, 2018 10:46 am
I did for my Nobile split board. I used fish board in 1/2 inch and drilled to mount on the 165/90 to the Nobile board. I then recessed stainless t-nuts for the rear 140 (liquid force) into the fish board. I shaped the fish board to a point in the front to reduce drag. it only has 6 holes. The front holes go through the mast plate/fishboard to the board. The rear mast plate mounts to the fish board. The rear fish board is mounted to the board. It worked fine. In the end I decided to recess stainless t-nuts into the board and it was super easy and worked great. This was a travel board and the plate was just another piece to lug along. After learning how easy it was I've converted several surf board and, better yet, skim boards into foil boards.
-
gmb13
- Very Frequent Poster
- Posts: 1935
- Joined: Wed Sep 12, 2007 10:19 am
- Kiting since: 1998
- Local Beach: Flag Beach, Fuerteventura
- Style: Everything
- Gear: Indiana, Sailmon
- Brand Affiliation: Indiana, Sailmon
- Location: Fuerteventura
-
Has thanked:
36 times
-
Been thanked:
295 times
Postby gmb13 » Tue Apr 24, 2018 1:15 pm
tswierkocki wrote: ↑Tue Apr 24, 2018 2:48 am
Does anyone know of a company who sells an adapter to mount a foil with 90X140 hole spacing on a board with 90X165 insert spacing?
Has anyone built an adapter? Recommendations?
I'd rather not add additional inserts to my board.
For that you should should be able to make your own adapter pretty easily. Not sure if anyone has a ready made one, as 140x90 is a super strange spacing. But basically you can make a simple adapter with 8mm Alu or steel block and a decent drill.
..
Gunnar
-
Rojbrown
- Medium Poster
- Posts: 66
- Joined: Sat Apr 09, 2011 3:31 am
- Kiting since: 2009
- Weight: 190lbs
- Local Beach: Lake Mojave boat launch
- Favorite Beaches: Lake Mohave AZ
SPI
Union Island
- Style: Intermediate surf/beginner foil
- Gear: Switch Helium 8/12/16
Hyperlink V1 12
- Brand Affiliation: None
-
Has thanked:
53 times
-
Been thanked:
12 times
Postby Rojbrown » Tue Apr 24, 2018 1:30 pm
I just ordered a Zeeko Spitfire. Curious if the mounting plate will work with the Nobile split board. Any feedback?
-
tswierkocki
- Frequent Poster
- Posts: 299
- Joined: Sat Feb 19, 2005 8:16 pm
- Kiting since: 2001
- Style: Hydrofoil, Surf, Freeriding
- Gear: 3m, 4m, 5m, 8m Flysurfer Peak 4 kites
7m, 10m Cabrinha Apollo kites
Cloud F28 surf foil
107cm Kanaha pocket board for kite foiling
4’8” Stretch Trow surfboard
133 Axis Vanguard twintip
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
8 times
Postby tswierkocki » Tue Apr 24, 2018 5:36 pm
Rojbrown wrote: ↑Tue Apr 24, 2018 1:30 pm
I just ordered a Zeeko Spitfire. Curious if the mounting plate will work with the Nobile split board. Any feedback?
I have the Nobile Skim Foil board and the Spitfire and they mate perfectly. You should not have any issues mounting the Spitfire on the Nobile split foil.
I'm looking into a Cloud 9 foil for kite/surf/SUP that I want to be able to mount on my Nobile Skim Foil.
-
Rojbrown
- Medium Poster
- Posts: 66
- Joined: Sat Apr 09, 2011 3:31 am
- Kiting since: 2009
- Weight: 190lbs
- Local Beach: Lake Mojave boat launch
- Favorite Beaches: Lake Mohave AZ
SPI
Union Island
- Style: Intermediate surf/beginner foil
- Gear: Switch Helium 8/12/16
Hyperlink V1 12
- Brand Affiliation: None
-
Has thanked:
53 times
-
Been thanked:
12 times
Postby Rojbrown » Wed Apr 25, 2018 12:31 am
tswierkocki wrote: ↑Tue Apr 24, 2018 5:36 pm
Rojbrown wrote: ↑Tue Apr 24, 2018 1:30 pm
I just ordered a Zeeko Spitfire. Curious if the mounting plate will work with the Nobile split board. Any feedback?
I have the Nobile Skim Foil board and the Spitfire and they mate perfectly. You should not have any issues mounting the Spitfire on the Nobile split foil.
I'm looking into a Cloud 9 foil for kite/surf/SUP that I want to be able to mount on my Nobile Skim Foil.
Thanks for the info!
Return to “Hydrofoil”
Who is online
Users browsing this forum: Abaltasis, alekbelia, blu, bragnouff, cglazier, Dirk, francis luengo, levity, lifeinthehood, max, nixmatters, redskykiter, rnelias and 182 guests