A forum dedicated to Hydrofoil riders
-
BigSky
- Medium Poster
- Posts: 107
- Joined: Fri Jan 06, 2017 11:29 am
- Local Beach: Duxbury
- Gear: Flysurfer, BRM and Lift
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
9 times
Postby BigSky » Sat Sep 01, 2018 4:19 pm
Hello, I'm looking for some help from the collective. I love my Lift mast and wings. Lately I've been getting water in my mast, enough to hear it move back and forth down the trailing edge chamber. There are no visible dings or scratches. Any ideas?
Last edited by
BigSky on Sun Sep 09, 2018 2:46 pm, edited 1 time in total.
-
junebug
- Frequent Poster
- Posts: 439
- Joined: Sat Jan 04, 2014 4:14 pm
- Kiting since: 2006
- Weight: 195 lbs
- Style: Freeride Twintip, Strapless Foil
- Gear: Rebels (6m, 8m, 11m, 13m)
Nobile NHP
Boxers (3.5m, 4m, 5m, 7m, 10m, 12m) (flat water)
Peak4s (3m, 4m, 5m, 6m) (waves)
Lift 150 v1 Surf front / 38 back (flat water)
Lift 170 v1 Surf front / 26 back (waves)
- Brand Affiliation: None
-
Has thanked:
42 times
-
Been thanked:
63 times
Postby junebug » Sat Sep 01, 2018 5:48 pm
I’m having the same problem. I can take off the wing and jerk the mast up and down and little water drops come out, but I can’t get it all out. Some of it sounds like it stuck up high in the mast. I emailed Lift last week for advice. I’ll post it once they get back to me.
-
junebug
- Frequent Poster
- Posts: 439
- Joined: Sat Jan 04, 2014 4:14 pm
- Kiting since: 2006
- Weight: 195 lbs
- Style: Freeride Twintip, Strapless Foil
- Gear: Rebels (6m, 8m, 11m, 13m)
Nobile NHP
Boxers (3.5m, 4m, 5m, 7m, 10m, 12m) (flat water)
Peak4s (3m, 4m, 5m, 6m) (waves)
Lift 150 v1 Surf front / 38 back (flat water)
Lift 170 v1 Surf front / 26 back (waves)
- Brand Affiliation: None
-
Has thanked:
42 times
-
Been thanked:
63 times
Postby junebug » Tue Sep 04, 2018 6:04 pm
I didn’t mean to preempt discussion of this topic. If anyone has any suggestions, I am all ears. I still haven’t hear back from Lift. I sent them another email yesterday.
Last edited by
junebug on Tue Sep 04, 2018 7:22 pm, edited 1 time in total.
-
DAnderson
- Medium Poster
- Posts: 130
- Joined: Thu Aug 25, 2016 2:17 pm
- Local Beach: SWFL
- Gear: 14.5 A Flite
8/5 A Roam
18/12 soul 11/9 av8
15/9 s3
ha725/195
ML B3
- Brand Affiliation: None
-
Has thanked:
13 times
-
Been thanked:
20 times
Postby DAnderson » Tue Sep 04, 2018 6:33 pm
Below is what I was directed to do. I never did it. I meant to re-seal the leaking screw attachment point.
"A very simple solution would be to drill a small hole in the bottom and a small hole in the top. 1/8” diameter. Then it can fill and release no problem and it would be clean. The cavity inside is small.
See attached images. They should help with the location of theholes. Use a 1/8" drill bit. You will feel it once you drill into the cavity."
-
Attachments
-
-
-
junebug
- Frequent Poster
- Posts: 439
- Joined: Sat Jan 04, 2014 4:14 pm
- Kiting since: 2006
- Weight: 195 lbs
- Style: Freeride Twintip, Strapless Foil
- Gear: Rebels (6m, 8m, 11m, 13m)
Nobile NHP
Boxers (3.5m, 4m, 5m, 7m, 10m, 12m) (flat water)
Peak4s (3m, 4m, 5m, 6m) (waves)
Lift 150 v1 Surf front / 38 back (flat water)
Lift 170 v1 Surf front / 26 back (waves)
- Brand Affiliation: None
-
Has thanked:
42 times
-
Been thanked:
63 times
Postby junebug » Tue Sep 04, 2018 7:24 pm
DAnderson wrote: ↑Tue Sep 04, 2018 6:33 pm
Below is what I was directed to do. I never did it. I meant to re-seal the leaking screw attachment point.
"A very simple solution would be to drill a small hole in the bottom and a small hole in the top. 1/8” diameter. Then it can fill and release no problem and it would be clean. The cavity inside is small.
See attached images. They should help with the location of theholes. Use a 1/8" drill bit. You will feel it once you drill into the cavity."
Thanks for posting. Is this the advice you got from Lift? Also, was this for the 2017 mast (i.e., the one with the single-wing attachment)?
-
DAnderson
- Medium Poster
- Posts: 130
- Joined: Thu Aug 25, 2016 2:17 pm
- Local Beach: SWFL
- Gear: 14.5 A Flite
8/5 A Roam
18/12 soul 11/9 av8
15/9 s3
ha725/195
ML B3
- Brand Affiliation: None
-
Has thanked:
13 times
-
Been thanked:
20 times
Postby DAnderson » Tue Sep 04, 2018 7:57 pm
Yes, that was from Lift for the 2017 model year. I had both 28 & 36" masts leaking just enough to hear it sloshing.
The idea of encouraging more water to enter seemed ludicrous to me.
The leakage seemed to be at one of the fuselage attachment points. The forward one? I just never bothered attempting an actual repair. I considered plumbers putty or something similar.
-
junebug
- Frequent Poster
- Posts: 439
- Joined: Sat Jan 04, 2014 4:14 pm
- Kiting since: 2006
- Weight: 195 lbs
- Style: Freeride Twintip, Strapless Foil
- Gear: Rebels (6m, 8m, 11m, 13m)
Nobile NHP
Boxers (3.5m, 4m, 5m, 7m, 10m, 12m) (flat water)
Peak4s (3m, 4m, 5m, 6m) (waves)
Lift 150 v1 Surf front / 38 back (flat water)
Lift 170 v1 Surf front / 26 back (waves)
- Brand Affiliation: None
-
Has thanked:
42 times
-
Been thanked:
63 times
Postby junebug » Tue Sep 04, 2018 11:03 pm
DAnderson wrote: ↑Tue Sep 04, 2018 7:57 pm
The idea of encouraging more water to enter seemed ludicrous to me.
This is a fair point, but I’m concerned about added weight. I don’t really have a sense of whether that concern is justified. I can’t tell how much water is in the mast or whether it is really making a difference in the weight of the mast.
-
grigorib
- Very Frequent Poster
- Posts: 4163
- Joined: Mon Aug 01, 2016 8:12 pm
- Kiting since: 2009
- Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
- Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x
For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
.
- Brand Affiliation: None
-
Has thanked:
468 times
-
Been thanked:
696 times
Postby grigorib » Wed Sep 05, 2018 5:17 pm
Quality issue / reject
I'd go straight back to Lift or to Nick directly and treat it as a faulty piece. Water has nothing to do inside carbon and whatever foam guys put inside the mast is obviously didn't bond under carbon well.
-
BigSky
- Medium Poster
- Posts: 107
- Joined: Fri Jan 06, 2017 11:29 am
- Local Beach: Duxbury
- Gear: Flysurfer, BRM and Lift
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
9 times
Postby BigSky » Sun Sep 09, 2018 2:43 pm
Okay, it appears I found a fix. For my fix I removed the screws and the barrel nut. There are no threads keeping the barrel nut in there. On the mast I taped the end where the screw enters and one end of the empty barrel nut hole. I mixed up enough 5 minute epoxy to completely fill both holes and used a brush to make sure it hit everything. I then removed the tape from where the screw enters and slowly let the epoxy mostly run out. I insert the barrel nut then tightened the screw. Once the epoxy cured I used a soldering iron to heat up the top of the screw to allow the screw to back out. Voila. I used the foil yesterday and no water.
I think I had a crack in the plastic where the wing attaches. If I'm being honest I did make pretty good contact with a rock while up on foil so that may be the cause, not QC on Lift's part. I too contacted Lift over a week ago and I'm disappointed no one is responding. I wasn't looking for a replacement after using the mast for 2 years but I was looking for a response and some suggestions. I really like Lift as a company and I've enjoyed their products but this does change my perception. Starting to think Moses for my next setup. Cheers.
-
junebug
- Frequent Poster
- Posts: 439
- Joined: Sat Jan 04, 2014 4:14 pm
- Kiting since: 2006
- Weight: 195 lbs
- Style: Freeride Twintip, Strapless Foil
- Gear: Rebels (6m, 8m, 11m, 13m)
Nobile NHP
Boxers (3.5m, 4m, 5m, 7m, 10m, 12m) (flat water)
Peak4s (3m, 4m, 5m, 6m) (waves)
Lift 150 v1 Surf front / 38 back (flat water)
Lift 170 v1 Surf front / 26 back (waves)
- Brand Affiliation: None
-
Has thanked:
42 times
-
Been thanked:
63 times
Postby junebug » Sun Sep 09, 2018 3:27 pm
BigSky wrote: ↑Sun Sep 09, 2018 2:43 pm
Okay, it appears I found a fix. For my fix I removed the screws and the barrel nut. There are no threads keeping the barrel nut in there. On the mast I taped the end where the screw enters and one end of the empty barrel nut hole. I mixed up enough 5 minute epoxy to completely fill both holes and used a brush to make sure it hit everything. I then removed the tape from where the screw enters and slowly let the epoxy mostly run out. I insert the barrel nut then tightened the screw. Once the epoxy cured I used a soldering iron to heat up the top of the screw to allow the screw to back out. Voila. I used the foil yesterday and no water.
I think I had a crack in the plastic where the wing attaches. If I'm being honest I did make pretty good contact with a rock while up on foil so that may be the cause, not QC on Lift's part. I too contacted Lift over a week ago and I'm disappointed no one is responding. I wasn't looking for a replacement after using the mast for 2 years but I was looking for a response and some suggestions. I really like Lift as a company and I've enjoyed their products but this does change my perception. Starting to think Moses for my next setup. Cheers.
Thanks. Just sent you PM for a little more info.
I’m also disappointed in the customer service. I have emailed them twice now and it’s almost been 2 weeks.
Return to “Hydrofoil”
Who is online
Users browsing this forum: No registered users and 376 guests